Amigurumi chick Free Pattern
Amigurumi chick Chick
Legend:
sc – single crochet
inc – increase
dec – decrease
ch – air loop
ch – air lifting loop
sl-st – connecting post
hdc – half double crochet
dc – double crochet
(…) х6 – repeat the action in
brackets 6 times.
What we need:
1. Yarn Art Jeans yarn (50% cotton / 50% acrylic 50g / 160m) in yellow (67), blue (75), green (79), white (62) colors, some orange yarn for the beak and pink yarn for the cheeks;
2. Filler (holofiber);
3. Hook number 2;
4. Black half-beads for eyes 10 mm in diameter;
5. Glue;
6. Black sewing thread for the decoration of the face;
7. Thick needle for stitching parts;
8. Scissors.
When using these materials, the height of the crumbs will be about 18 cm.
Legs (2 pcs):
Amigurumi chick The thread is blue. We fill tightly as we knit.
We collect a chain of 5ch + 1ch
1) 4sc, 3sc in 1 loop, 3sc, inc (12)
2) inc, 3sc, (inc) х3, 3sc, (inc) х2 (18)
3) sc, inc, 3sc, (sc, inc) х3, 3sc, (sc, inc) х2 (24)
4) For the rear half loops 24sc
5-6) 24sc (2 rows)
7) 2sc, dec, (sc, dec) х5, 5sc (18)
8) 5sc, (dec) х3, 7sc (15)
Change the thread to yellow.
9) For the back half loops 4sc, (dec) x3, 5sc (12)
10-15) 12sc (6 rows)
Cut the thread, fix it. We knit the second leg in the same way, finish the row by knitting an additional 4 sc.
We attach a blue thread to the first free half-loop of the 8th row and knit the top of the boot in a spiral.
1) 15sc
2) 15sl-st.
Cut the thread, fix it.
Torso:
From the second leg we collect a chain of 6ch, insert the hook into the 11th column of the last row of the first leg and knit in a circle.
16) 12sc on the first leg, 6sc on one side of the chain, 12sc on the second leg, 6sc on the other side of the chain (36)
17) (5sc, inc) x6 (42)
18) 14sc, (sc, inc) х3, 15sc, (sc, inc) х3, sc (48)
19) (7sc, inc) x6 (54)
20-21) 54sc (2 rows)
Change the thread to blue.
22) 54sc
23) For the back half loops 54sc;
Change the thread to green.
24) For the rear half loops 54sc;
Change the thread to white.
25) (7sc, dec) x6 (48)
Change the thread to blue.
26) 48sc
Change the thread to green.
27) 3sc, dec, (6sc, dec) х5, 3sc (42)
Change the thread to white.
28) 42sc
Change the thread to blue.
29) (5sc, dec) x6 (36)
Change the thread to green.
30) 36sc
Change the thread to white.
31) 5sc, dec, (10sc, dec) х2, 5sc (33)
Change the thread to blue.
32) 33sc
Change the thread to green.
33) (9sc, dec) x3 (30)
Change the thread to white.
34) 30sc
Change the thread to blue.
35) 4sc, dec, (8sc, dec) х2, 4sc (27)
Change the thread to green.
36) 27sc
Change the thread to white.
37) (7sc, dec) х3 (24)
Change the thread to yellow.
38) For back half loops 24sc
39) 24sc.
Cut the thread, leaving a long end for sewing.
Head:
We knit with a thread of the main color. We fill tightly as we knit.
1) 6sc in amigurumi ring
2) (inc) x6 (12)
3) (sc, inc) x6 (18)
4) sc, inc, (2sc, inc) х5, sc (24)
5) (3sc, inc) x6 (30)
6) 2sc, inc, (4sc, inc) х5, 2sc (36)
7) (5sc, inc) x6 (42)
8) 3sc, inc, (6sc, inc) х5, 3sc (48)
9-12) 48sc (4 rows)
13) (7sc, inc) x6 (54)
14) 4sc, inc, (8sc, inc) х5, 4sc (60)
15-19) 60sc (5 rows)
20) 4sc, dec, (8sc, dec) х5, 4sc (54)
21) (7sc, dec) x6 (48)
22) 3sc, dec, (6sc, dec) x5, 3sc (42)
23) (5sc, dec) x6 (36)
24) 2sc, dec, (4sc, dec) х5, 2sc (30)
25) (3sc, dec) x6 (24)
26) sc, dec, (2sc, dec) x5, sc (18)
27) (sc, dec) x6 (12)
28) (dec) x6 (6).
We tighten the hole, hide the thread inside the part.
We make a tightening for the peephole:
To do this, mark points 1 and 2 between rows 14 and 15 at a distance of 10 sc and points 3 and 4 between row 15 and 16 right below points 1 and 2 (as shown in the photo).
Now we insert the needle into the head, fasten the thread and bring it out at point 1, then insert it into the head at point 3 and output it at point 2, pull the thread. We again insert the needle into the head at point 4 and withdraw it at point 1, pull the thread.
We repeat this movement 2-3 times, fasten the thread, cut it off and hide it inside the head.
The next step is to glue the eyes with a glue gun.
Then I embroider the whites of the eyes with white thread, embroider the eyelashes and eyebrows with black thread.
Beak:
Orange thread
1) 6sc in amigurumi ring
2) 6sc;
3) (sc, inc) х3 (9).
Cut off the thread, leaving the long end to be sewn between 15 and 18 rows.
Cheeks (2 pcs):
In the amigurumi ring we knit 2ch, 10hdc, sl-st in the 2nd ch.
Cut the thread, leaving a long end for sewing between 17 and 21 rows.
We embroider a smile with a black thread.
Tufted:
We insert the needle in the lower part of the head, fasten the thread and bring it out at the crown in the amigurumi ring, again insert the needle into the head into the amigurumi ring, withdraw the thread in the lower part of the head, leaving a small loop on the crown, fasten the thread in the lower part of the head so that the loop does not run away … We repeat this movement 2 more times.
Bow:
We form an amigurumi ring, knit 3ch, 3dc, 3ch, sl-st, 3ch, 3dc, 3ch, sl-st, tighten, wrap a little bow and sew to the head.
Skirt:
First, we knit the underskirt with a green thread. To do this, attach the thread to the last free half loop of the 22nd row.
1) 3ch, dc in the same loop of the base, then in each loop we knit increments from dc to the end of the row, finish the sl-st row in the 3rd ch;
2) 3ch, inc from dc, (dc, inc from dc) x53, ending eat row sl-st in 3rd ch; Cut the thread, fix it.
Now we knit the upper skirt with a blue thread. To do this, attach the thread to the last free half loop of the 23rd row.
1) 3ch, dc in the same loop of the base, then in each loop we knit increments from dc to the end of the row, finish the row with sl-st in the 3rd ch.
Cut the thread, fix it.
Collar:
The thread is green. To do this, attach the thread to the last free half loop of the 37th row.
1) ch, sc in the same loop of the base, 23sc, we end the row sl-st in ch;
2) Behind the back half loops ch, (sc, dc, sc) into the same base loop, sl-st into the next loop, (sc, dc, sc) into 1 loop, sl-st into the next loop, alternate to the end of the row.
We end the row with sl-st. Cut the thread, fix it.
At this stage, we try on the decorated head to the body and begin to sew. As we sew, we stuff the neck tightly so that the head does not dangle under its own weight.
Wings (2 pcs):
We knit with a thread of the main color. We do not fill.
1) 6sc in amigurumi ring
2) (sc, inc) х3 (9)
3) 9sc
4) sc, inc, (2sc, inc) х2, sc (12)
5) 12sc
6) (sc, inc) x6 (18)
7-14) 18sc (8 rows)
15) (sc, dec) x6 (12)
16) (sc, dec) x4 (8).
Fold the piece in half and join the edges by knitting 4sc.
Cut the thread, leaving a long end for sewing. With the help of pins, we try on the wings to the body and sew at the level of the 35th row.
It remains to embroider the laces with white thread, and our chick is ready!
