Amigurumi Fili the Dwarf Free Pattern
Fili the Dwarf Amigurumi Fili the Dwarf Free Pattern
Legend:
sc – single crochet;
inc – increase (knit 2 columns from 1 loop of the previous row);
sl-st – connecting post;
dec – decrease (knit 2 columns with a common vertex);
ch – air loop;
hdc – half double crochet;
(….) X… – repeat the specified number of times indicated in brackets;
(6) – the number of columns in a row;
blo – we knit by the back half loop;
flo – front half loop.
Necessary materials:
– yarn Yarn Art Jeans color 73 – 1/3 skeins, color 01 – quite a bit, color 76 – for the collar and cuffs, color 52 – for shoes, color 47-1 / 2 skeins, color 51 – 1 // 2 skeins, some color 40;
– hook number 2.0;
– depending on the design of the face, felt of white, black and blue colors, or acrylic paints of the same colors;
– thick cardboard or plastic for insoles;
– filler.
When using the specified materials and a hook, the growth of the gnome excluding the cap is 25cm.
Height may vary depending on knitting density. Stuff the toy as you knit.
Enjoy your knitting, even loops!
We start knitting with fingers. You will need to knit 2 sets of fingers for two hands.
Knit with color # 73.
Thumb:
1р) 6sc into magic ring (6)
2p) 6sc (6)
3p) 6sc (6)
Fasten and cut the thread.
The rest of the fingers (3pcs)
1р) 6sc into magic ring (6)
2p) 6sc (6)
3p) 6sc (6)
4p) 6sc (6)
We fasten the thread on two fingers and cut it off, the third one does not, we will continue to knit the handle.
Hand
1p) 3sc on the 1st finger, 3sc on the 2nd finger, 6sc on the 3rd finger, 3sc on the 2nd finger, 3sc on the 1st finger (18)
2р) inc, 8sc, inc, 8sc (20)
3p) 20sc (20)
We knit the next 2 rows differently for each handle.
Left hand
4p) 2sc grabbing the loops of the thumb and hand, 18sc along the arm (20)
5p) 4sc on the thumb, 18sc on the hand (22)
Right hand
4p) 8sc on the arm, 2sc grabbing the loops of the thumb and hand, 10sc on the arm (20)
5p) 8sc on the hand, 4sc on the finger, 10sc on the arm (22)
Then we knit in the same way.
6p) 22sc (22)
7p) 2dec, 7sc, 2dec, 7sc (18)
Change the thread to blue, knit a sleeve
8p) Knit for blo (5sc, inc) x3 (21)
9-13r) 21sc (21)
14p) 4sc, 3dec, 6sc, (3sc in 1 loop) х2, 3sc (22)
15p) 22sc (22)
16p) 5sc, 2inc, 7sc, 2dec, 4sc (22)
17-23r) 22sc (22)
Fasten and cut the thread on the right handle. On the left handle, knit another 3sc, fasten and cut the thread.
Fill the handles. If desired, insert wire into the handles.
Boot (2pcs)
We knit with a green thread
Boot top
1p) 4sc (4)
2р) (1sc, inc) х2 (6)
3р) (1sc, inc) х3 (9)
4p) 3sc, 3sl-st, 3sc (9)
5р) (2sc, inc) х3 (12)
6p) 4sc, 4sl-st, 4sc (12)
7р) (3sc, inc) х3 (15)
8p) 6sc, 3inc, 6sc (18)
9p) 9sc, 21ch, in 17 loop from the hook we knit 1sc, 5sc along a chain of ch, 9sc (44)
10р) 8sc, 6hdc, 4sc, inc, 7sc, inc, 3sc, 6hdc, 8sc (46)
11-14r) 46sc (46)
Fasten and cut the thread. Put aside
Boot foot
1p) we cast on 11ch, starting from 2 loops from the hook we knit: inc, 8sb, 3sc in 1 loop, 9sc (22)
2p) 2inc, 8sc, 3inc, 8sc, inc (28)
3р) (1sc, inc) х2, 8sc, (1sc, inc) х3, 9sc, inc (34)
4р) (2sc, inc) х2, 8sc, (2sc, inc) х3, 10sc, inc (40)
4р) (3sc, inc) х2, 8sc, (3sc, inc) х3, 11sc, inc (46)
Fasten the thread, cut, leaving a long thread for sewing. Cut out the insole from plastic or cardboard. We fold the sole and the top of the shoe inside out to each other and sew together, after inserting the insole. Stuff the shoe.
Bootleg
We attach a green thread in the center of the heel of the shoe and knit the bootleg.
1р) 8sc, inc, 8sc (18)
2p) knit for flo (2sc, inc) x6 (24)
3p) (3sc, inc) x6 (30)
4p) 7sc, 11hdc, 12sc (30)
Fasten the thread, cut and hide the tip.
Legs
We knit in blue. We attach the thread in the center of the heel and knit for the remaining blo of the 1st row
bootleg
Left leg
1p) 18sc (18)
2р) (5sc, inc) х3 (21)
3р) (6sc, inc) х3 (24)
4-6p) 24sc (24)
7р) 3sc, inc, 3sc, inc, 16sc (26)
8р) 5sc, inc, 1sc, inc, 18sc (28)
9p) knit 23sc, fasten and cut the thread
Right leg
1p) 18sc (18)
2р) (5sc, inc) х3 (21)
3р) (6sc, inc) х3 (24)
4-6p) 24sc (24)
7р) 14sc, inc, 3sc, inc, 5sc (26)
8р) 17sc, inc, 1sc, inc, 6sc (28)
9p) 28sc (28)
Do not cut the thread. We will continue to knit the body with it
Body
1p) 3sc on the right leg, 2ch, 28sc on the left leg (knit the first sc in the next loop after the last sc of the leg), 2sc along the ch chain, 25sc along the right leg (60)
2p) 13sc, inc, 4sc, inc, 14sc, 2inc, 14sc, inc, 4sc, inc, 5sc (66)
3р) 16sc, inc, (6sc, inc) х2, 14sc, inc, (6sc, inc) х2, 6sc (72)
4-7r) 72sc (72)
8p) knit for blo 72sc (72)
9p) 72sc (72)
10p) (10sc, dec) x6 (66)
11р) 66sc (66)
12p) (9sc, dec) x6 (60)
13p) 60sc (60)
14p) (8sc, dec) x6 (54)
15p) 54sc (54)
16p) (7sc, dec) x6 (48)
17-19r) 48sc (48)
20p) (14sc, dec) x3 (45)
21р) (13sc, dec) х3 (42)
22p) (12sc, dec) x3 (39)
23p) (11sc, dec) x3 (36)
In the next row we will knit handles.
24p) 12sc, 8sc capturing hand and body loops, 11sc, 6sc capturing hand and body loops (36)
Work another 2sc while grabbing the loops of the arm and body and transfer the marker. This will now be the start of the row.
25p) 10sc on the body, 14sc on the arm, 11sc on the body, 14sc on the arm (49)
26p) 4sc, dec, 43sc (48)
27p) (4sc, dec) x8 (40)
28p) (3sc, dec) x8 (32)
29p) knit for blo (2sc, dec) x8 (24) Fasten and cut the thread
Now we will knit the details of our gnome’s clothes.
Blouse bottom
We knit with a blue thread, hold the gnome upside down and attach the thread in the center of the front to the remaining flo 7 of the torso row. We will knit in rotary rows.
1p) 72sc, 1ch lift, turn (72)
2p) (11sc, inc) x6, 1ch lift, turn (78)
3p) (12sc, inc) x6, 1ch lift, turn (84)
4-5p) 84sc, 1ch lift, turn (84)
Fasten and cut the thread, hide the tip.
In front of the blouse
We knit in white with rotary rows
1p) Cast on 11ch, starting from 2 loops from the hook, knit: 10sc, 1ch lift, turn (10)
2-4p) 10sc, 1ch lift, turn (10)
5p) dec, 6sc, dec, 1ch lift, turn (8)
6-7p) 8sc, 1ch lift, turn (8)
8p) dec, 4sc, dec, 1ch lift, turn (6)
9-11r) 6sc, 1ch lift, turn (6)
12p) dec, 2sc, dec, 1ch lift, turn (4)
13-16r) 4sc, 1ch lift, turn (4)
After the last row, we do not turn the knitting, we tie the part in a circle sc, in the corners of the part we do 2sc at 1 point. Fasten and cut the thread.
Next, we will knit the side strips in blue. We attach the thread in the place where we finished knitting. We knit 16sl-st on the side for a white flo. We do 1ch of the lift, turn and knit for the blo of the rows of sl-st 16sc. We knit the second side in the same way, only we attach the thread in the corner of the bottom of the part.
Sew the piece to the body for the remaining half-loops of the row of blue sl-st.
Cuffs
We knit in blue, attach the thread to the center of the inner side of the hand to the remaining half-loops of the handle at the place where the sleeve began to be knitted.
1p) 18sc (18)
2р) (5sc, inc) х3 (21)
3p) 21sc (21)
4р) (6sc, inc) х3 (24)
5p) 24sc (24)
Fasten and cut the thread, hide the tip. On the second handle, tie the cuffs in the same way.
Collar
Knit in light blue, attach the thread in the center of the front to the remaining flos of the 28th row of the body.
In this case, we hold the body of the gnome with its legs up. We will knit in rotary rows.
1p) (3sc, inc) x7, 3sc, 1ch lift, turn (38)
2p) (4sc, inc) x7, 3sc, 1ch lift, turn (45)
3p) 4sc, (inc, 5sc) x6, inc, 4sc, 1ch lift, turn (52)
4-5p) 52sc, 1ch lift, turn (52)
6p) dec, 48sc, dec, 1ch lift, turn (50)
7p) dec, 46sc, dec, 7sc along the lateral side of the collar, sl-st into the base of the body in the center of the collar, 7sc along the second lateral part of the collar.
Fasten and cut the thread. Hide the tip.
Belt
Knit with brown yarn
1p) we collect 73ch, starting from 2p from the hook we knit 72sc, 1ch of lifting, turn (72)
2-3p) 72sc, 1ch lift, turn (72)
Fasten and cut the thread, leaving the tip for sewing.
Buckle
We knit with beige yarn
1p) 10ch, close in a circle and knit: (3sc in 1 loop) x2, 3sc, (3sc in 1 loop) x3, 3sc, sl-st
Fasten and cut the thread, hide the tip.
We attach the belt to the body, sew in a circle on the body, sew on the buckle.
Head
Knit with flesh color
1р) 6sc into magic ring (6)
2p) 6inc (12)
3p) (1sc, inc) x6 (18)
4p) (2sc, inc) x6 (24)
5p) (3sc, inc) x6 (30)
6p) (4sc, inc) x6 (36)
7p) (5sc, inc) x6 (42)
8p) (6sc, inc) x6 (48)
9p) (7sc, inc) x6 (54)
10p) (8sc, inc) x6 (60)
11-18r) 60sc (60)
19p) 18sc, 9inc, 6sc, 9inc, 18sc (78)
20р) 22sc, inc, (3sc, inc) х2, 16sc, inc, (3sc, inc) х2, 22sc (84)
21-26r) 84sc (84)
27p) 9sc, dec, (1sc, dec) x8, 6sc, (3sc in 1 loop) x2, 6sc, dec, (1sc, dec) x8, 9sc (70)
28p) 4sc, dec, (9sc, dec) x2, 4sc, (dec from 3sc knitted together) x2, 3sc, dec, (9sc, dec) x2, 5sc (60)
29p) 4sc, dec, (8sc, dec) х5, 4sc (54)
30p) (7sc, dec) x6 (48)
31р) 3sc, dec, (6sc, dec) х5, 3sc (42)
32p) (5sc, dec) x6 (36)
33р) 2sc, dec, (4sc, dec) х5, 2sc (30)
34p) (3sc, dec) x6 (24)
Fasten and cut the thread, leaving the thread for sewing. We stuff the head, forming cheeks in places of 9 increments and a chin in the place where 3sc was knitted in 1 loop.
Spout
1p) 5ch, starting from 2 loops from the hook we knit: inc, 2sc, 3sc in 1 loop, 3sc on the back of the chain (10)
2p) 2inc, 2sc, 3inc, 2sc, inc (16)
3р) 1sc, inc, 7sc, inc, 6sc (18)
4-5r) 18sc (18)
6p) (1sc, dec) x6 (12)
Fasten and cut the thread, leaving the thread for sewing. Stuff in the nose and sew in the area of the row with 9 increments on each cheek.
Ears
1р) 6sc into magic ring (6)
2p) 6inc (12)
3р) (3sc, inc) х3 (15)
4-8r) 15sc (15)
9p) (3sc, dec) x3 (12)
10p) 12sc (12)
Fasten the thread, cut off leaving a long thread for sewing and forming the ear shell.
Along the line where the yellow thread runs in the photo, we sew the eyelet through and through. We unfold the eyelet as shown in the photo and sew it to the head.
Depending on the purpose of the toy, we make out the face. If the toy is interior, then paint the eyes and mouth with paints. If the toy is playful, then we make the eyes out of felt, and we embroider the mouth.
Using elongated loops, we knit sl-st hair in a spiral.
We sew the head to the body.
Beanie
We knit in red
1р) 6sc into magic ring (6)
2-7r) 6sc (6)
8р) (1sc, inc) х3 (9)
9-11r) 9sc (9)
12р) (2sc, inc) х3 (12)
13-14r) 12sc (12)
15р) (3sc, inc) х3 (15)
16-17r) 15sc (15)
18р) (4sc, inc) х3 (18)
19-20r) 18sc (18)
21р) (5sc, inc) х3 (21)
22-23r) 21sc (21)
24р) (6sc, inc) х3 (24)
25-26r) 24sc (24)
27р) (7sc, inc) х3 (27)
28p) 27sc (27)
29р) (8sc, inc) х3 (30)
30r) 30sc (30)
31р) (9sc, inc) х3 (33)
32р) (10sc, inc) х3 (36)
33р) (11sc, inc) х3 (39)
34р) (12sc, inc) х3 (42)
35р) (13sc, inc) х3 (45)
36р) (14sc, inc) х3 (48)
37р) (15sc, inc) х3 (51)
38р) (16sc, inc) х3 (54)
39р) (17sc, inc) х3 (57)
40р) (18sc, inc) х3 (60)
41р) (19sc, inc) х3 (63)
42р) (20sc, inc) х3 (66)
43р) (21sc, inc) х3 (69)
44р) (22sc, inc) х3 (72)
45р) (23sc, inc) х3 (75)
46р) (24sc, inc) х3 (78)
47р) (25sc, inc) х3 (81)
48р) (26sc, inc) х3 (84)
49р) (27sc, inc) х3 (87)
50р) (28sc, inc) х3 (90)
51-52r) 90sc (90)
53р) (8sc, inc) х10 (100)
54р) (4sc, inc) х20 (120)
55р) (5sc, inc) х20 (140)
56r) 140sc (140)
Fasten and cut the thread, hide the tip.
Pomponchik
Knit in white
1р) 6sc into magic ring (6)
2p) 6inc (12)
3p) (1sc, inc) x6 (18)
4p) (2sc, inc) x6 (24)
5-8r) 24sc (24)
9p) (2sc, dec) x6 (18)
10p) (1sc, dec) x6 (12)
Pompom fill
11p) 6dec (6)
Pull the thread to secure the hole. Sew a pom-pom to the hat.
Here is our gnome and is ready to please you.
