Amigurumi Mouse in clothes Free Pattern

Mouse in clothes

I advise at any stage of knitting.

Note:

1. The toy is knitted in a spiral without lifting loops.

2. At the beginning of the row, use a marker or other colored thread to help

mark the first loop of each new row.

3. For knitting this toy, you can use any yarn,

necessarily the same thickness.

Required materials and tools:

1. Yarn art jeans – number 49 (mouse color).

2. Yarn art jeans, or Alize cotton gold – light pink color – for nose and legs.

3. Yarn art jeans, or Alize cotton gold – white – for shorts.

4. Yarn art jeans, or Alize cotton gold – pink color – for blouses and shoes.

5. Hook number 1.5.

6. Holofiber or synthetic fluff.

7. Eyes on a secure mount (diameter 5 or 6 mm.).

8. Wire (for the mobility of the upper legs and tail).

9. Electrical tape, or adhesive plaster, or double-sided tape and cotton wool (for wrapping the edges of the wire).

10. Pliers.

11. Threads of a floss of black color (for decoration of a muzzle).

12. Pastel pink pencil (for cheeks).

The size of the finished toys, when using the specified materials, 11 cm.

Legend:

MR – amigurumi ring

CH – air loop

SL-ST – connecting post

SC – single crochet

İNC – increase

DEC – decrease

HDC – half double crochet

(…) – number of loops in a row

Knitting description:

Nose (light pink color):

1 row. 6 SC to MR (6)

2 row. (1 SC, İNC) * 3 times (9)

3 row. 9 SC

4 row. (1 SC, DEC) * 3 times (6)

Cut off the light pink thread, attach the mouse-colored thread, continue knitting the muzzle (it is important to use a marker here to the muzzle turned out to be even, symmetrical):

5 row. (1 SC, İNC) * 3 times (9)

6 row. (1 SC, İNC, 1 SC) * 3 times (12)

7 row. 3 SC, (1 SC, İNC) * 3 times, 3 SC (15)

8 row. (2 SC, İNC, 2 SC) * 3 times (18)

9 row. (1 SC, İNC, 1 SC) * 6 times (24)

10 row. (3 SC, İNC) * 6 times (30)

11 row. 30 SC.

Line up your knitting.

12 row. 28 SC, 2 CH (2 SC skip) (30)

Row 13. 2 CH (2 SC skip), 28 SC (30)

4 CH are needed in order to insert the wire from the paws.

14-16 rows. 30 SC

Now you need to set the eyes for the mouse, if you use the eyes on secure fastening, as well as sew a ribbon if you knit a Christmas tree toy. To make the muzzle symmetrical and neat, I suggest sew a few stitches with any thread before you start registration. Shown in detail in the photo.

17 row. (3 SC, DEC) * 6 times (24)

Row 18. (1 SC, DEC, 1 SC) * 6 times (18)

Fill the part with filler

19 row. (1 SC, DEC) * 6 times (12)

20 row. 6 DEC (6)

The thread needs to be cut, the hole closed.

Face design:

The photo shows the tightening process for the eye and mouth. Let’s define two points for the mouth, it should be 2 SC, which are next to each other. Introducing the needle into one from these points, you do not need to make a knot, we leave one edge of the thread sticking out, the second we output at the right eye, we introduce the needle one loop below, we output at that point, with which they began to make tightening, the thread after each stitch is tightened slightly, we insert the needle into the second point of the mouth, withdraw it from the left eye, insert the needle to the adjacent SC (1 row higher or lower, depending on where you brought the needle out), and output to the second point of the mouth, remove the needle, tie 2 threads into a knot, hide them inside heads.

We embroider a mouth, for this we make stitches with a light pink thread from one

points of the mouth to the other – 2 times. We tint the cheeks, mouth and the inside of the ears

(I have a pastel pencil). We embroider antennae, eyebrows and eyelashes. I was embroidering

floss thread – in one thread.

Ears (2 parts):

1 row. 6 SC to MR (6)

2 row. Expand knitting, knit HDC – (1 HDC, İNC) * 3 times (9)

3 row. Expand knitting, knit SC – (1 SC, İNC, 1 SC) * 3 times (12)

Cut the thread, fasten.

Sew the ears to the head, I sewed the peephole 5-6 rows further.

Upper legs (2 parts):

Light pink color:

1 row. 5 SC to MR (5)

2-3 rows. 5 SC

Change the thread color to mouse:

4 row. İNC, 1 SC, İNC, 1 SC, İNC (8)

5-7 rows. 8 SC

Change the color of the thread to the color of the blouse:

8 row. (3 SC, İNC) * 2 times (10)

9 row. 10 SC

Cut the thread, fasten.

We knit along the foot at the point of transition of the thread from mouse to pink (blouse) 8 SL-ST.

Lower legs (2 parts):

Pink color (clothing color):

1 row. 4 CH, from the 2nd from the loop hook 2 SC, 3SC in 1, 1 SC, İNC (8)

2 row. İNC, 1 SC, 3 İNC, 1 SC, 2 İNC (12)

3 row. 14 SC for the back wall of the hinges

4 row. 4 SC, 3 DEC, 4 SC (11)

We leave the thread, do not cut it. Attach the mouse-colored thread:

5 row. knit by the back wall of the loops – 1 SC, 2 DEC, 1 SC, 2 DEC, 1 SC (7)

6 row. 1 SC, İNC, 1 SC, İNC, 1 SC, İNC, 1 SC (10)

7 row. 10 SC

Change the thread color to white:

8 row. (2 SC, İNC, 2 SC) * 2 times (12)

9 row. (3 SC, İNC) * 3 times (15)

Cut the thread, fasten.

In the 5th row behind the front walls of the loops

knit with pink thread 11 SL-ST.

We knit between 7 and 8 along the foot

white thread 10 SC.

Body:

At this stage, it is important to fill the lower legs with filler. Further, we will unite.

We knit with a white thread. Attach the thread to the middle of the inner

sides of the left foot:

1 row. 15 SC on the left foot, then we continue knitting, attaching the thread to middle of inner side of right foot – 15 SC on right foot (30)

2- 3 rows. 30 SC

Change the color of the thread to the color of the blouse:

4 row. 30 SC

5-8 rows. 30 SC

9 row. (3 SC, DEC) * 6 times (24)

10 row. 24 SC

Line up the knitting.

Next, we will attach the upper legs.

11 row. 1 SC, DEC, 1 SC, attach the foot – knit

5 SC with presser foot (see photo), 1 SC, DEC, 1 SC, DEC, 1

SC, 5 SC with foot, 1 SC, DEC (20)

12 row. 3 SC at back, 5 SC at presser foot, 5 SC at

breast, 5 SC at the foot, 2 SC at the back (20)

13 row. 20 SL-ST

If you want to make the upper legs movable, in this place you need to insert the wire into both legs, then twist them together at the neck.

Change the thread color to mouse:

Row 14. we knit by the back wall of the loops, through the mouse-colored loops. Row

we knit in such a way as to make 4 decreases – 1 on the back, one on the breast, and 2 on toes (16)

Cut the thread, fasten.

Between the 3rd and 4th row we knit with a pink thread (the color of the blouse) 30 SC.

We sew the head to the body.

Tail:

1 row. 5 SC to MR (5)

2-14 rows. 5 SC

If you want the tail to be movable, insert wire.

Sew the ponytail to the body.

Your mouse is ready!

Yorum yapın