Amigurumi Turtle Arnie and Lina Free Pattern
Turtle Arnie and Lina
Amigurumi Turtle Arnie and Lina Free Pattern Difficulty: medium
Symbols
MR – amigurumi ring
SC – single crochet
DC – double crochet
İNC – increase
DEC – decrease
CH – air loop
SL-ST – connecting rod
(.) – dot
Devices and materials
1. Any smooth yarn (semi-cotton, cotton, acrylic. My whole toy is knitted from yarnart
jeans) green about 30 g (for one toy).
2. The same yarn in other colors, for a boy 4 colors, for a girl 3 colors. Approximately by
10 – 15 gr.
3. Hook 2.5
4. Filler
5. Eyes on a secure attachment 16 mm
6. White felt
7. Cilia
8. Strong thread for tightening
9. Thread for mouth embroidery (I also used yarnart jeans)
10. Thread for embroidery of rhombuses on a brown shell
11. Stitching needle
12. Long needle for tightening
13. Needles with beads at the ends
14. Scissors
Arms
1.6 in MR
2.6 İNC (12)
3 – 5.12 SC (3 rows)
6. (SC, DEC) * 4 (8)
7. 8 SC
8. (SC, İNC) * 4 (12)
9 – 16.12 SC (8 rows)
Change the color to the color of the blouse or dress.
17 – 20.12 SC (4 rows)
We do not stuff the pens.
Legs – body
We begin to knit shoes.
1. We cast on 6 CH, from the second loop from the hook we knit 4 SC, 3 SC in
the last loop. On the other side 3 SC, İNC (12)
2. İNC, 3 SC, 3 İNC, 3 SC, 2 İNC (18)
3.18 SC for the back wall
4. – 5. 18 SC
6.6 SC, 3 DEC, 6 SC (15)
Change the color to the main one (green), continue to knit the leg.
7.15 SC for the back wall
8. – 11.15 SC (4 rows)
Change the color to the color of the pants, if we knit a boy, if we knit a girl
we continue to knit with the main color.
12 – 16.15 SC
Cut and fasten the thread on the first leg, leave the end while waiting for sewing
not necessary. We knit the second leg, we do not cut the thread.
Fill the legs.
On the second leg, the row must be finished in the center of the side. We make SL-ST and 1 CH.
We connect the legs, we begin to knit on the first leg. The series must begin behind.
17.15 SC for the first leg, 1 SC for CH, 15 SC for the second leg, 1 SC for CH (32)
18. We knit a row in a circle, on the sides we make 1 İNC. (34)
19. We knit a row in a circle, on the sides we make 1 İNC. (36)
20 – 21.36 SC
If we knit a boy, we change the thread to the color of the blouse, if we change the girl to dress color.
22.36 SC
23.36 SC. If we knit a boy, then we knit as usual SC for both half loops, if we knit a girl we knit this row for the back half loops.
24. Knit a row in a circle, making 1 DEC on the sides. (34)
25.34 SC
If we knit a boy, we change the color to an additional one, it will be a strip on blouse, we continue to knit the girl with the main color of the dress.
26 – 27.34 SC
Change the color on the boy’s blouse to the main one.
28. Knit a row in a circle, making 1 DEC on the sides. (32)
29.32 SC
We stuff the body in the knitting process.
Again we change the color to an additional color, we make a strip on the blouse and on the dress.
30. Knit a row in a circle, making 1 DEC on the sides. (thirty)
31.30 SC
Change the color to the main blouse and dress.
32. We knit a row in a circle, on the sides we do 1 DEC each. (28)
33.28 SC
34. We knit a row in a circle, on the sides we do 1 DEC each. (26)
35. In this row we will tie hands. I will give a description of how it came out for me,
you, depending on the density of the knitting, may come out a little differently.
The handles should be exactly centered on the sides. 6 SC, 6 SC together with 1 arm
(fold the hand in half and knit on both sides), 7 SC, 6 SC with second hand, 1 SC (26)
36.26 SC, SL-ST
Cut the thread, leave the end for sewing on the head.
We make out the eyes
Before we start knitting the head, we need to shape the eyes. Cut out from
felt circles are white, 4 – 5 mm larger than the size of the eyes. I have
the eyes are 16 mm, the size of the felt circles is approximately 20 mm.
We insert the eyes into the felt and glue the eyelashes with super glue.
After you have prepared the eyes, you can start knitting the head.
Head
1.6 in MR
2.6 İNC (12)
3. (SC, İNC) * 6 (18)
4. (2 SC, İNC) * 6 (24)
5. (3 SC, İNC) * 6 (30)
6. (4 SC, İNC) * 6 (36)
7. (5 SC, İNC) * 6 (42)
8. – 9. 42 SC
10. (6 SC, İNC) * 6 (48)
11.48 SC
12. (7 SC, İNC) * 6 (54)
13.54 SC
14. (8 SC, İNC) * 6 (60)
15.60 SC
16. (9 SC, İNC) * 6 (66)
17 -19. 66 SC (3 rows)
20. (9 SC, DEC) * 6 (60)
At this point, you can insert the eyes. Insert between 11 and 12 next to distance 9 SC between them.
21. (8 SC, DEC) * 6 (54)
22. (7 SC, DEC) * 6 (48)
23. (6 SC, DEC) * 6 (42)
We stuff the head in the knitting process. It is necessary to create the correct shape. The head is narrower at the top and widens towards the bottom.
24. (5 SC, DEC) * 6 (36)
25. (4 SC, DEC) * 6 (30)
26. (3 SC, DEC) * 6 (24)
27. (2 SC, DEC) * 6 (18)
28. (SC, DEC) * 6 (12)
29.6 DEC in a row (6)
Cut the thread, pull off the hole, hide the end of the thread.
Carapace
1 piece
1.6 in MR
2.6 İNC (12)
3. (SC, İNC) * 6 (18)
4. (2 SC, İNC) * 6 (24)
5. (3 SC, İNC) * 6 (30)
6. (4 SC, İNC) * 6 (36)
7. (5 SC, İNC) * 6 (42)
8. (6 SC, İNC) * 6 (48)
9. (7 SC, İNC) * 6 (54)
10. (8 SC, İNC) * 6 (60)
11. (9 SC, İNC) * 6 (66)
12. – 14.66 SC (3 rows), SL-ST
2 detail
1.6 in MR
2.6 İNC (12)
3. (SC, İNC) * 6 (18)
4. (2 SC, İNC) * 6 (24)
5. (3 SC, İNC) * 6 (30)
6. (4 SC, İNC) * 6 (36)
7. (5 SC, İNC) * 6 (42)
8. (6 SC, İNC) * 6 (48)
9. (7 SC, İNC) * 6 (54)
10. (8 SC, İNC) * 6 (60)
eleven.( 9 SC, İNC) * 6 (66), SL-ST
We knit together 2 parts of the shell, stuff in the process.
Skirt dresses
We attach the thread to the free half-loops, where we started to knit dress.
1. We knit in a circle increments in all loops DC, SL-ST
2. DC, İNC knit the whole row, SL-ST.
Cut the thread, hide the tip.
Face tightening
Mark with needles the places of the ties in the same way as shown in the photo. Mouth tightening points
located above and below 19 row, obliquely at a distance of 1 SC.
1. Insert the needle to the side of the head and output to 1 (.), Insert into 2 (.) And output
at 4 (.). From 4 (.) We deduce in 3 (.), Then again in the original (.) On the side of the head.
We tighten the thread, fix the eyes. And we do the same thing again,
those are the second time at the same points. We tighten the thread as we need
(do not overtighten it too much). We tie the ends of the thread together and
hide inside the head.
We made the first tightening.
Let’s move on to the second one.
We insert tglu from the bottom of the head and output to (.) 5, from (.) 5 we output to (.) 6. From 6
(.) we output to (.) 7, from 7 to 8 (.). From 8 (.) We output to the original (.) At the bottom
heads. We tighten, and we go through the second circle at all these points.
We tighten, tie and hide the ends of the thread inside the head.
The second tightening is ready.
Third tightening.
We also insert the thread from the bottom of the head, and output it to 9 (.), From 9 to 10 (.). of 10 (.)
we deduce in 11 (.), from 11 in 12 (.). Out of 12 we output to the original (.) At the bottom heads, pull up and do the second circle.
The third tightening is ready.
After we finished making the tightening, we need to glue the felt on the eyes.
to the head, because now it does not stick out beautifully with us. In the appearing from embroider the mouth. I inserted the needle into the lower points of the bindings mouth.
Assembly:
Sew the head to the body
Sewing the shell in a circle to the back
Shoes design:
Boy: on 5 central loops we knit the tongue of the boots, we hook
hook for free half loops.
1.5 SC, 1 CH, turn knitting
2.5 SC.
Cut the thread, pull it out, hide the tip.
Girl:
We knit free half-loops, SC in a circle. Cut off the thread, the tip
hide.
Cap
1.6 in MR
2.6 İNC (12)
3. (SC, İNC) * 6 (18)
4. (2 SC, İNC) * 6 (24)
5. (3 SC, İNC) * 6 (30)
6. (4 SC, İNC) * 6 (36)
7. (5 SC, İNC) * 6 (42)
8. (6 SC, İNC) * 6 (48)
9. (7 SC, İNC) * 6 (54)
10. – 14. 54 SC
We do not cut the thread, we will knit a visor. We take out from the middle of the ball
the second end of the thread. We knit a visor with a double thread. Leave the hook the same.
1. knit by the front half-loops 15 SC, CH, turn knitting.
2 – 3. We knit in the same way, but only we hook the hook on both sides of the loop, along
15 SC in swivel rows.
The end of the thread remained at the corner of the visor, we do not cut the thread, but we tie it cap.
We tie the side edge of the visor, then we tie the entire cap in a circle, and
the second side of the visor.
Fasten the thread, cut, hide the tip.
Hat
1.6 in MR
2.6 İNC (12)
3. (SC, İNC) * 6 (18)
4. (2 SC, İNC) * 6 (24)
5. (3 SC, İNC) * 6 (30)
6. (4 SC, İNC) * 6 (36)
7. (5 SC, İNC) * 6 (42)
8. (6 SC, İNC) * 6 (48)
9. (7 SC, İNC) * 6 (54)
10. – 14. 54 SC
15. Next, knit the brim of the hat by the front half loop, knit in a circle DC,
make increments in each loop, SL-ST, 2 CH.
16. (DC, İNC DC) * in a circle to the end of the row, SL-ST. Fasten the thread, hide the tip.
On the shell we embroider rhombuses in brown
Our turtles are ready!
Thank you for knitting with me!
