Amigurumi Fat Mouse Freee Pattern
List of materials
1. YarnArt SuperPerlee (acrylic 100%, 100gr-400m) gray, pink
color, a little red for the tongue, white for the mouth.
2. Sew-on eyes. For the declared yarn, the diameter is 13mm. (Having
some experience, you can use the eyes on a safe mount)
3. White felt for the eyes
4. Strong thread and long tuck needle
5. Hook No. 1.5
6. Neck attachment. I used a cotter pin, I needed discs with a diameter of 40 mm.
7. Plastic for insoles in feet
8. Well, that’s ALL! How little is needed for happiness, right ?!
Pinterest Pin photo
Legend
Sl-st – connecting post
Ch-
MR – amigurumi ring
Sc – single crochet
İnc- increase
Dec – decrease
DVDec – double decrease (three loops together)
loop – half loop
For the backside. loop – behind the back half loop
For before. loop – for the front half loop
Upper legs.
The marker in this part may not be aligned, but in the end
look to get it like this: – on the left foot, the end of the last
rows on the same level with BP (thumb)
– on the right foot, the end of the last row in the middle of the outer side.
If necessary, either knit an additional column or dissolve.
1. Cast on a chain of 4 Ch in pink: 2 Sc, 3Sc in the last loop, Sc, İnc (8)
2. – 4p (3 rows) 8 Sc Left foot
5. In this row we knit the thumb (BP). We insert the hook into the loop,
draw out the working thread and dial 4Ch, then insert the hook into
the same loop and knit a regular column without
nakida: BP, 7 Sc (8) Change the thread to gray.
6. (Sc, İnc) * 4 (12)
7.-9 p (3 rows) 12 Sc
10. (İnc, 5Sc) * 2 (14)
11.-12p (2 rows) 14 Sc
13. (İnc, 6 Sc) * 2 (16)
14.– 15p (2 rows) 16 Sc. Cut the thread, fasten
Right foot
5. In this row we knit the thumb (BP). We insert the hook into the loop,
draw out the working thread and dial 4Ch, then insert the hook into
the same loop and knit a regular single crochet: 3 Sc, BP, 4 Sc (8)
change thread
6. (Sc, İnc) * 4 (12)
7.-9 (3 rows) 12 Sc
10. (5 Sc, İnc) * 2 (14)
11.-12 (2 rows) 14 Sc
13. (6 Sc, İnc) * 2 (16)
14.-15p (2 rows) 16 Sc. Cut the thread, fasten
Lower legs
The part marker runs down the middle of the back of the legs. IN process, if necessary, align.
1. Dial a chain of 6Ch in pink: İnc, 3 Sc, 4 Sc in the last loop, 3 Sc, İnc, (14)
2. Sc, İnc, 3 Sc, İnc * 4, 3 Sc, İnc, Sc (20)
3. İnc, Sc, İnc, 3 Sc, (İnc, Sc) * 4, İnc, 2 Sc, İnc, Sc, İnc (29)
4. Sc, İnc, 2 Sc, İnc, 3 Sc, (İnc, 2 Sc) * 4, İnc, 3 Sc, İnc, 2 Sc, İnc, Sc (38)
5. 38 Sc for the back loop. At this stage, we cut out the shape of the foot from the plastic.
We insert into the foot when it suits you.
6.Sc, Dec, 7 Sc, (Dec, 2 Sc) * 4, Dec, 7 Sc, Dec, Sc (31)
7. Dec, 3 Sc, Dec, Sc, (Dec, Sc) * 4, Dec, Sc, Dec, 4 Sc, Dec (22)
8.2 Sc, Dec, 2 Sc, Dec * 5, 1 Sc, Dec, Sc, Dec (14)
Left foot
9. Attach the gray thread: 14 Sc per front loop.
10. (İnc, 2 Sc) * 2, İnc, 6 Sc, İnc (18)
11. (İnc, 2 Sc) * 2, İnc, 11 Sc (21)
12. (3 Sc, İnc) * 3, 9 Sc (24)
13.24 Sc.
14.18 Sc. Cut the thread, fix
Right foot
9. Attach the gray thread: 14 Sc for the front loop
10. İnc, 6 Sc, İnc, (2 Sc, İnc) * 2 (18)
11.11 Sc, İnc, (2 Sc, İnc) * 2 (21)
12.9 Sc, (3 Sc, İnc) * 3 (24)
13.-14p 24 Sc. Work 5 more Sc. We do not cut the thread, we continue knitting.
Body
The marker runs down the middle of the back. During knitting align.
1.3Ch, on the left leg 24 Sc, along the chain from Ch
İnc * 3, 24 Sc, on the other side of the chain Ch
İnc * 2 (58) We put the marker here. Passes through
the middle of the back, in the process of knitting we eliminate.
2. İnc in the last loop of the chain Ch, 56 Sc. Move the marker. (59)
3.59 Sc
4.58 Sc, İnc (60)
5.60 Sc
6. (9 Sc, İnc) * 6 (66)
7.5 Sc, İnc, (10 Sc, İnc) * 5.5 Sc (72)
8 – 13 (6 rows) 72 Sc
14.56 Sc, Dec, (4 Sc, Dec) * 2, 2 Sc (69)
15.2 Sc, Dec, (4 Sc, Dec) * 2, 53 Sc (66)
16.50 Sc, (3 Sc, Dec) * 3, Sc (63)
17.2 Sc, Dec, (3 Sc, Dec) * 2, 49 Sc (60) Here’s to me this is where it is convenient to stuff the legs filler, tight to clearly their plumpness loomed.
18.48 Sc, (Dec, 2 Sc) * 3 (57)
19. (2 Sc, Dec) * 3.45 Sc (54)
20.16 Sc, Dec, (2 Sc, Dec) * 5.16 Sc (48)
21. İnc, 4 Sc, İnc, 6 Sc on the left hand (count
on the foot in the course of knitting 5 Sc, and insert the hook
through the 6 loop of the foot and body at the same time), Sc,
Dec, (2 Sc, Dec) * 5, Sc, 6 Sc on right foot
(counting similar to the left), İnc, 5 Sc (45) In this row, I knit
an offset loop to align the marker.
22.6 Sc, İnc, 10 Sc on free loops of the left foot, (Sc, Dec) * 6, 10 Sc on
free buttonholes on the right foot, İnc, 6 Sc, İnc (50)
23.– 24 p (2 rows) 50 Sc. At this stage, we fill the body with filler,
distributing it especially on the ass and belly.
25.13 Sc, Dec, 20 Sc, Dec, 13 Sc (48)
26.12 Sc, DVDec, 3Sc, Dec, 8 Sc, Dec, 3 Sc, DVDec, 12 Sc (42)
27. (5 Sc, Dec) * 6 (36)
28.36 Sc. We measure the diameter of the mounting hole. I have a disk
diameter 40mm.
29.2Sc, Dec, (4 Sc, Dec) * 5, 2 Sc (30) We fill the body with filler to the end,
especially paying attention to the hangers. Put the filler more tightly
in the area of double decreases in the shoulders. This will form a beautiful lean
and I. The whole
Do not stuff the foot tightly, otherwise you will just get a thick sausage.
We insert the mount.
30. (3 Sc, Dec) * 6 (24)
31. Sc, Dec, (2 Sc, Dec) * 5, Sc (18)
32. (Sc, Dec) * 6 (12)
33.Dec * 6
Cut the thread, fasten.
HEAD
The head marker runs down the middle of the chin.
1.6 Sc in MR
2.6 Sc
3.Inc * 6 (12)
4.-5 (2 rows) 12 Sc
6. (Sc, İnc) * 6 (18)
7. (5 Sc, İnc) * 3 (21)
8.21 Sc
9. (6 Sc, İnc) * 3 (24)
10.16 Sc, (İnc, 3 Sc) * 2 (26)
11. (İnc, 3 Sc) * 2, 18 Sc (28) Here I recommend aligning the marker.
12.8 Ch, 6 Sc skip, İnc, 3 Sc, İnc * 8, 3 Sc, İnc, 6 Sc. (40)
13.8 Sc along a chain of Ch, (İnc, Sc) * 2, İnc, (Sc, İnc) * 10, 7 Sc (53)
14.3 Sc, Dec, Sc, Dec, (İnc, 2 Sc) * 2, 24 Sc, (2 Sc, İnc) * 2, Dec, 7 Sc (54)
15.13 Sc, İnc * 2, 26 Sc, İnc * 2, 11 Sc (58)
16.12 Sc, İnc * 2, 26 Sc, İnc * 2, Sc, İnc, 12 (64)
17. (2 Sc, İnc) * 5, 5 Sc, İnc, (10 Sc, İnc) * 2, 5 Sc, (İnc, 2 Sc) * 5, İnc (78)
________________________________________________________________
At this stage, we knit a mouth. Attach white thread to the first
Ch and then we knit:
1. In the corner of the mouth 2 Sc, 6 Sc along the missed
hinges, 2 Sc per corner, 8 Sc in Ch chain
(18)
2.18 Sc
3. (Dec, Sc) * 6 (12)
4. Dec * 6. Fasten the thread and trim. Unscrew the mouth inside the head.
________________________________________________
________________
We continue to knit the head.
18.- 29 (12 rows) 78 Sc (After tying 4 rows, place a marker for
fastening. If you have a plastic joint, then in row 4 we knit 76 Sc, 2Ch.
Fifth row: 2Ch, 76 Sc. Further in the description without changes)
30. (11 Sc, Dec) * 6 (72)
31.5 Sc, Dec, (10 Sc, Dec) * 5.5 Sc (66)
32. (9 Sc, Dec) * 6 (60)
33.4 Sc, Dec, (8 Sc, Dec) * 5, 4 Sc (54)
34. (7 Sc, Dec) * 6 (48)
35.3 Sc, Dec, (6 Sc, Dec) * 5, 3 Sc (42) At this stage, we attach the head to
torso, twisting the cotter pin. Make sure your mouth is slightly sideways.
For those who use their eyes on a safe mount, I recommend fixing them now, then it will be problematic. Fix approximately in the 12th row, approximately the distance between the eyes is 12 columns. But look carefully, each has an eye size different, knitting density too. Landmark I I give an approximate one.
Don’t forget under your eyes put white felt for the whites of the eyes more. Because the true look of the face will be visible only after tightening. And much easier then just cut off the extra felt. If you have sewn-on eyes, then the data manipulation is not for you.
36. (5 Sc, Dec) * 6 (36)
37.2 Sc, Dec (4 Sc, Dec) * 5, 2 Sc (30)
38. (3 Sc, Dec) * 6 (24) Stuff our head filler. Especially the cheeks and forehead. Rotik
hold it with your finger so that it stays inside.
39. Sc, Dec (2 Sc, Dec) * 5, Sc (18)
40. (Sc, Dec) * 6 (12)
41. Dec * 6. Fasten and cut the thread.
The next stage is over. The photo shows a variant of a rat with
eyes on a secure mount. After tightening, you will immediately see where
it is worth cutting off the extra felt. We leave it that way for now.
EARS
We knit 2 parts in pink
1.6 Sc in MR
2.Inc * 6 (12)
3. (Sc, İnc) * 6 (18)
4. Sc, İnc (2 Sc, İnc) * 5, Sc (24)
5. (3 Sc, İnc) * 6 (30) nine
6.2 Sc, İnc (4 Sc, İnc) * 5, 2 Sc, Sl-st (36) Cut and fasten the thread.
We knit in the same way 2 gray parts, but after knitting the 6th row, we do not cut the thread.
Apply the gray detail and the pink seamy side to each other and tie them together.
7. (5 Sc, İnc) * 6 (42)
8. Making the strapping Sl-st in a circle. A thread trim, leaving long end
for sewing.
Fold edge the ear in half and make a couple of stitches with the thread left.
NOSE
1. Pink 6 Sc in MR. Received the end of the thread after being pulled into the ring does not
cut, and lay along the knitting.
2. İnc * 6 (12)
Depending on the size of your toy, you may need to knit some more one additional row. Link it like this:
(2 Sc, Dec) * 3
We tighten strongly the thread laid along the knitting, tightening the row
as tight as possible. We put the resulting part on the tip of the nose of the head and
we sew.
TAIL
1.6 Sc in MR
2.-14 (13 rows) 6 Sc
15.Inc, 5 Sc (7)
16.-29 (14 rows) 7Sc
30.İnc, 6 Sc (8)
31.-40 (10 rows) 8 Sc.
Cut the thread, leaving the end for sewing. Optionally, you can insert a thin wire inside.
TONGUE
Draw a chain of 4Ch in red: from the second loop from the CC hook,
Sc, 4 Sc to last st, on the other side of the chain: Sc, CC. A thread
cut, leaving the end for sewing.
Sew the tongue deep into the mouth (to the last row with decreases) literally
one stitch. And hide the end of the thread
inside the head.
DECORATION OF THE MUD
For example, here are two options for the head: on the left head used
eyes on a secure mount and tightening will be done with them.
Difficult, but possible. On the left head I will use
sewn eyes, i.e. it will be easier here. First tightening, then already
we sew eyes.
The photo on the left shows the places where the tightening should be done.
Unless otherwise indicated, I always insert the needle and thread into the base of the neck.
(even along the edge of the mount, so that in the future you will not see traces
tie-downs).
We drive the needle and thread into the corner of the mouth and grab 1 loop.
We withdraw from one side of the nose bridge, procl
put the thread on top
canvas and insert the needle on the other side of the bridge of the nose (in my case 4
loop is enough). We withdraw the needle in the other corner of the mouth and also
capturing eat one loop. We tighten up. We fix and hide the ends of the threads
inside the head.
We make an eyeliner marked in black in the photo.
We introduce a needle with a thread at the base of the neck, we withdraw it in the outer corner of the eye,
we insert the needle into the inner corner of the eye (thread over the canvas), output
thread in the inner corner of the other eye and insert it into the outer corner of the eye,
leading the thread to the original point at the base of the neck. Pull up like
as much as possible!
In the same way, make the tightening marked in the photo
in red. Pull up!
I repeated each of these tightening 3 times so that the result was
perfect. Do not be lazy, do the same and the result will please you!
After you finish with the braces, sew the eyes and ears there,
where you find it most successful!
Sew on the tail and tongue.
Adjust the felt around the eyes, if necessary, and embroider the eyebrows.
Since I am not a fan of clothes on animals, Pukhlik will not have it either.
Yes Yes! Even in spite of the fashion. In my opinion, clothes can hide
all the charms of a rat. This chubby rat! The maximum that I see on
This cute creature is a scarf. Soft, New Year’s scarf! Therefore,
needlewomen, do not blame me, but there will be no clothes. She’s totally on yours
discretion if someone sees Pukhlik differently. All in your hands.
So the master class has come to an end. Personally, I’m sorry … But! When something
ends, something new is bound to begin. So I’m not with you
I say goodbye and hope to see you in my next master class.
I hope the knitting was easy for you and the result makes you smile.
