Amigurumi Big Dinosaur Free Pattern

Note:

1. The toy is knitted in a spiral pattern without lifting loops, unless otherwise specified.

2. At the beginning of the row, use a marker or other colored thread to help mark the first loop of each new row.

Required materials and tools:

1. Himalaya Dolphin baby – number 350 (light green) – 2 skeins – you can replace with Yarn Art Dolce yarn, they are almost the same in thickness.

An important point – 2 skeins were just enough for me, it’s better to have it in stock third skein.

2. Alize Cotton Gold – number 126 (green) – for thorns.

3. Yarn Art Jeans – number 67 (light yellow) – for a scarf.

4. Pekhorka “Children’s novelty” – number 02 (black) – for the eye and mouth.

5. Hook number 3.75 (you can use number 4).

6. Hook number 1.5.

7. Holofiber or synthetic fluff.

8. White or light green sewing thread – for sewing parts.

9. Long and regular needle.

10. Beaded pins – for pinning parts before sewing.

11. Scissors.

12. 2 small white buttons – for the pupils.

Legend:

MR – amigurumi ring

CH – air loop

SL-ST – connecting post

SC – single crochet

İNC – increase

DEC – decrease

HDC – half double crochet

(…) – number of loops in a row

The height of the toy, when using the specified materials, is about 40 cm.

Knitting description:

Head:

Yarn “Himalaya Dolphin baby”, hook number 3.75.

We fill with filler during knitting.

1 row. 8 SC to MR (8)

2 row. 8 İNC (16)

3 row. (1 SC, İNC) * 8 times (24)

4 row. (1 SC, İNC, 1 SC) * 8 times (32)

5 row. (3 SC, İNC) * 8 times (40)

6 row. (2 SC, İNC, 2 SC) * 8 times (48)

7 row. (7 SC, İNC) * 6 times (54)

8 row. (4 SC, İNC, 4 SC) * 6 times (60)

9 row. (9 SC, İNC) * 6 times (66)

10-19 row. 66 SC – 10 rows

20 row. (10 SC, DEC, 10 SC) * 3 times (63)

21 row. (19 SC, DEC) * 3 times (60)

22 row. (9 SC, DEC, 9 SC) * 3 times (57)

23 row. (17 SC, DEC) * 3 times (54)

24 row. (7 SC, DEC) * 6 times (48)

25 row. (3 SC, DEC, 3 SC) * 6 times (42)

26 row. (5 SC, DEC) * 6 times (36)

27 row. (2 SC, DEC, 2 SC) * 6 times (30)

Row 28. (3 SC, DEC) * 6 times (24)

Row 29. (1 SC, DEC, 1 SC) * 6 times (18)

30 row. (1 SC, DEC) * 6 times (12)

31 row. 6 DEC (6)

If you are using a thread as a marker, do not remove it yet.

Cut the thread, close the hole, hide the thread inside the head. Place, where we finished knitting the head – the back of the head.

Body:

Yarn “Himalaya Dolphin baby”, hook number 3.75.

We fill with filler during knitting.

1 row. 9 CH, knit from the second loop from the hook – İNC, 6 SC, 4 SC in 1 loop, 6

SC, İNC (20)

2 row. 2 İNC, 6 SC, 4 İNC, 6 SC, 2 İNC (28)

3 row. (1 SC, İNC) * 2 times, 6 SC, (1 SC, İNC) * 4 times, 6 SC, (1 SC, İNC) * 2 times (36)

4 row. (1 SC, İNC, 1 SC) * 2 times, 6 SC, (1 SC, İNC, 1 SC) * 4 times, 6 SC, (1 SC, İNC, 1 SC) * 2 times (44)

5 row. (3 SC, İNC) * 2 times, 6 SC, (3 SC, İNC) * 4 times, 6 SC, (3 SC, İNC) * 2 times (52)

6 row. (2 SC, İNC, 2 SC) * 2 times, 6 SC,

(2 SC, İNC, 2 SC) * 4 times, 6 SC, (2 SC, İNC, 2 SC) * 2 times (60)

7 row. (5 SC, İNC) * 2 times, 6 SC, (5 SC,

İNC) * 4 times, 6 SC, (5 SC, İNC) * 2 times (68)

8 row. (3 SC, İNC, 3 SC) * 2 times, 6 SC,

(3 SC, İNC, 3 SC) * 4 times, 6 SC, (3 SC, İNC, 3 SC) * 2 times (76)

9 row. (7 SC, İNC) * 2 times, 6 SC, (7 SC, İNC) * 4 times, 6 SC, (7 SC, İNC) * 2 times (84)

10-19 row. 84 SC – 10 rows

20 row. (7 SC, DEC, 7 SC) * 2 times, (4 SC,

DEC, 4 SC) * 2 times, (7 SC, DEC, 7 SC) * 2 times (78)

21 row. (11 SC, DEC) * 6 times (72)

22 row. (4 SC, DEC, 4 SC) * 2 times, 6 SC, (4 SC, DEC, 4 SC) * 2 times, 6 SC, (4 SC, DEC, 4 SC) * 2 times (66)

23 row. (1 SC, DEC, 1 SC) * 6 times, 18 SC, (1 SC, DEC, 1 SC) * 6 times (54)

24 row. (1 SC, DEC) * 6 times, 18, (1 SC, DEC) * 6 times (42)

25 row. (2 SC, DEC, 2 SC) * 2 times, (7 SC, DEC) * 2 times, (2 SC, DEC, 2 SC) * 2 times (36)

26 row. (1 SC, DEC) * 3 times, 18 SL-ST, (1 SC, DEC) * 3 times (30)

27 row. 6 SC, 18 SL-ST, 6 SC (30)

28-44 rows. 30 SC – 17 rows

Cut the thread, fix it.

Tail:

Yarn “Himalaya Dolphin baby”, hook number 3.75.

1 row. 6 SC to MR (6)

2 row. 6 İNC (12)

3 row. 12 SC

4 row. (3 SC, İNC) * 3 times (15)

5-6 rows. 15 SC

7 row. (2 SC, İNC, 2 SC) * 3 times (18)

8-10 rows. 18 SC

11 row. (5 SC, İNC) * 3 times (21)

12-13 rows. 21 SC

Cut the thread, fix it, fill the part with filler.

Paws (4 parts):

Yarn “Himalaya Dolphin baby”, crochet number 3.75.

1 row. 8 SC to MR (8)

2 row. 8 İNC (16)

3 row. (1 SC, İNC) * 8 times (24)

4-8 rows. 24 SC

Cut the thread, fix it, fill it detail filler.

Eyes (2 parts):

Yarn “Children’s novelty”, crochet number 1.5.

1 row. 6 SC to MR (6)

2 row. 6 İNC (12)

3 row. 1 SC, (İNC HDC, 1 HDC) * 2 times,

İNC HDC, (1 SC, İNC) * 3 times (18)

We leave the thread for sewing, cut, fix.

Spikes (9 parts):

Alize Cotton Gold yarn, hook number 1.5.

1 row. 6 SC to MR (6)

2 row. (1 SC, İNC) * 3 times (9)

3 row. (1 SC, İNC, 1 SC) * 3 times (12)

4 row. 12 SC

5 row. (3 SC, İNC) * 3 times (15)

6 row. 15 SC

7 row. (2 SC, İNC, 2 SC) * 3 times (18)

8 row. 18 SC

9 row. (5 SC, İNC) * 3 times (21)

10 row. 21 SC

11 row. (3 SC, İNC, 3 SC) * 3 times (24)

12 row. 24 SC

We leave the thread for sewing, trimming, fastening, details slightly we stuff.

Scarf:

Yarn art jeans yarn, hook number 1.5.

202 CH, we knit, starting from the fourth loop from the hook, HDC in each loop.

Parts assembly and decoration:

Sew the paws to the body. In turn, we pin the legs with pins to the body

(one at a time), then sew on. In the course of sewing, add to the paws filler.

Then we sew on the tail:

Then we sew thorns to the body. I got 2 spikes on the tail, 1 on back (between the tail and the neck), 2 on the neck. You may end up with two thorns will fit between the tail and the neck, then you can sew two (this depends on where the tail is sewn). At the top of the neck must be left some space for a scarf (if your dinosaur is wearing a scarf).

Now try on your head to your neck. If you want a head the dinosaur was directed a little down (like mine), then you need to on the neck knit additional rows. To do this, mark 14 loops – from one the side of the neck to the other on the back – as shown in the photo between fingers:

We knit: 1 SL-ST, 12 SC, SL-ST, cut the thread, fasten.

We will tie another row – we return to the place from which we started knit the previous row, retreat one loop to the right:

We knit: SL-ST, 14 SC, SL-ST, cut the thread, fasten.

Now on the head we mark 2 points that will be useful to us for sewing to the body. The first point will be sewn on the center of the front of the neck, the second is in the center of the neck at the back. First, we define the bottom of the head (if you used a thread as a marker, then this marker line is now like times and is needed). We put 2 pins, one after 12 rows, the second after 21 rows:

Now we will sew on the eyes. First, he will outline them with pins:

Now we will sew on the pupil buttons, for this we need a large needle.

We introduce a needle with a white thread between the two pins with which we have outlined the places where the head is sewn to the neck, we leave one edge sticking out, the second is displayed in one of the eyes:

Sew on a button, put the needle in the second eye, sew on a button, we withdraw the needle to the place where the second end of the thread remains sticking out. Igloo remove, tie two threads in a knot, hide the threads inside the head.

Now we outline the mouth with two pins (beginning and end):

This is how one of the pins for the mouth is located relative to the eye:

We introduce a needle with a thread “Children’s novelty” in black at the bottom of the neck (there where we introduced the white thread for the pupils), we leave one of the ends of the thread stick out, the second is drawn at one of the pins with which we marked the mouth.

We embroider the mouth with a chain stitch along the row from one pin to another. This we embroider the nostrils with a thread. At the end, we take the needle to the place where we have left stick out the second end of the thread. Remove the needle, tie a knot, hide the threads inside the head, more details in the photo:

Now we sew thorns to the head. If you sewed between the tail and the neck two thorns, then you can sew three on the head, instead of four, or knit more one thorn.

If desired, we tint the cheeks with a pastel pencil of pink or Red.

It remains to sew the head to the neck. Insert a thread of a contrasting color in front of the neck in the center:

We attach the same thread to the place of the pin, which marked the place

sewing to the body in front (making a stitch) and tying both ends of the thread bow.

We do the same on the back of the neck. Then we sew, the threads along the way we remove sewing. Add filler to the neck. Your dinosaur is ready!

Yorum yapın