Amigurumi Teddy bear Free Patter
“Teddy bear”
List of required materials:
1. Himalaya dolphin baby yarn of dark gray color (320) – any shade of gray will do (yarn consumption, indicated by the crochet, 1.5 skeins)
2. Yarn Himalaya dolphin baby white (muzzle)
3. YarnArt Jeans yarn. Blue (1 skein) and white – scarf and cap. Gray – patches.
4. Hook number 3.75 mm for the toy
5. Hook 2, 75 mm for scarf and cap
6. Filler (Sintepon, etc.)
7. Joint for toys – 25 (Handles – legs) – 4 pcs, 40 mm – 1 pc (neck)
8. Needle and sewing thread. Black sewing thread for decoration.
9. Eyes on a secure mount (9-10 mm)
10. Decorative button for scarf (optional)
Select the size of the eye in proportion to the size of your toy.
The size of the toy will depend on the density of your knitting, the selected yarn and the hook number.
Amigurumi Teddy bear Toy size (when crocheting number 3.75 – 29 cm
Legend:
sc – single crochet
dc – double crochet
hdc – half double crochet
ch-air loop
(1) – number of loops
inc – increase
dec – decrease
PP – lifting loop
1.-row
SL-ST-connecting post
See – see
* – footnote for additional tips
Pens:
* Marker runs straight in front of the handle, perpendicular to the top
1.6 sc into magic ring (6)
2.6 inc (12)
3. (1 sc, inc) * 6 (18)
4. (2 sc, inc) * 6 (24)
5. – 8.24 sc (24)
We fill the handles as we knit
9.18 sc, 3 dec (21)
10.3 dec, 9 sc, 3 dec (15)
11.3 dec, 9 sc (12)
12. – 19. 12 sc (12)
* When using the joints of the handle, we fill as tightly as possible
20.6 dec (6)
Insert the joint between 17-18 rows. The splint leg comes out on the inside of the handle (See photo)
** If the handles will be knitted, we only fill the beginning of the handles tightly, after row 19 we knit for both parts of knitting 6 sc Amigurumi Teddy bear
Legs:
* Marker goes in front
1.6 sc into magic ring (6)
2.6 inc (12)
3. (1 sc, inc) * 6 (18)
4. (2 sc, inc) * 6 (24)
5. (3 sc, inc) * 6 (30)
6. – 8. 30 sc (30)
* When using joints, as knitting, we stuff the legs as tightly as possible
Insert the joint between 19-20 rows. The leg of the cotter pin comes out on the inside of the leg of the toy.
** If the legs will be knitted, we only fill the beginning of the legs tightly, after 21 rows we knit for both parts of knitting 6 sc
9.24 sc, 3 dec (27)
10.3 dec, 21 sc (24)
11.18 sc, 3 dec (21)
12.3 dec, 15 sc (18)
13. – 20. 18 sc (18)
21. (1 sc, dec) * 6 (12)
22.6 dec (6)
Cut the thread, leaving a long tip. Pull off remaining loops with a needle and remaining thread
Body:
* Marker goes straight back, perpendicular to the top, if necessary, knit another 1-2 sc and align the beginning of the row (offset loop)
1.6 sc into magic ring (6)
2.6 inc (12)
3. (1 sc, inc) * 6 (18)
4. (2 sc, inc) * 6 (24)
5. (3 sc, inc) * 6 (30)
6. (4 sc, inc) * 6 (36)
7. (5 sc, inc) * 6 (42)
8. (6 sc, inc) * 6 (48)
9. – 14. 48 sc (48) – For tying in legs see **
We insert the legs between 11 – 12 rows (Check in which row the legs will look better for your toy). We fix the joint. Amigurumi Teddy bear
The tip of the leg of the joint can be melted with a lighter and slightly flattened for a more secure attachment.
** If the legs will be tied in, then make sure that the marker goes over the body exactly from behind, in the middle of the back, without displacement. If necessary, knit another 1-2 sc and reposition the marker. And For legs in rows 11-12 – 10sc, 6 sc (knit in the leg), 16 sc, 6 sc (knit in the leg), 10sc (48)
15.18 sc, 6 dec, 18 sc (42) – See *****
16. (5 sc, dec) * 6 (36)
17. – 18. 36 sc (36)
19. (4 sc, dec) * 6 (30)
20. – 24.30 sc (30) For knitting handles see ***
We insert the handles between 21 – 22 rows (Check in which row the legs will look better for your toy). We fix the joint.
The tip of the joint leg can be melted with a lighter and slightly flattened for a more secure attachment
*** If the handles will be knitted: In rows 21-23 we knit 5sc, 6 sc (we knit a handle), 8sc, 6 sc (we knit a handle), 5sc (24)
25. (3 sc, dec) * 6 (24)
**** If you will knit your head. Start after this range. Head pattern from row 5 and further along the pattern. But then do not forget that we insert the eyes at 14-15. Also (without using joints) the head can be sewn
26. (2 sc, dec) * 6 (18)
27. (1 sc, dec) * 6 (12)
We fill as tightly as possible, insert the joint. We knit the decreases to the end, until the base of the joint closes
***** To tie the bear (In a dress or skirt), after the 15th row, change the color of the body to the color of the clothes, knit:
16.36 sc (36)
17.36 sc for back half loop (36)
Further according to the scheme. To get out We knit a skirt in the 17th row behind the front wall 3 hdc in one loop. Another row of hdc. We tie one more row with simple sc.
Head:
1.6 sc into magic ring (6)
2.6 inc (12)
3. (1 sc, inc) * 6 (18)
4. (2 sc, inc) * 6 (24)
5. (3 sc, inc) * 6 (30)
6. (4 sc, inc) * 6 (36)
7. (5 sc, inc) * 6 (42)
8. (6 sc, inc) * 6 (48)
9. (7 sc, inc) * 6 (54)
We put the head on the leg of the joint, in the very center of knitting, and slam it. We fill as we knit, tighter Amigurumi Teddy bear
* When using a knuckle or knitting, the beginning of the row goes from the bottom of the head. When sewing on, the opposite is true. Therefore, you need to carefully monitor which row to insert the eyes.
10. – 17.54 sc (54)
We insert the eyes in rows 11-12 (there is a distance of 1 column between the eyes). If the head will be sewn on, we insert the eyes in about 14-15 rows (the beginning of the row from the top)
18. (7 sc, dec) * 6 (48)
19. (6 sc, dec) * 6 (42)
20. (5 sc, dec) * 6 (36)
21. (4 sc, dec) * 6 (30)
22. (3 sc, dec) * 6 (24)
23. (2 sc, dec) * 6 (18)
24. (1 sc, dec) * 6 (12)
25.6 dec (6)
Cut the thread, leaving a long tip. Pull off the remaining loops with a needle and the rest of the thread.
Muzzle:
White
1.6 sc into magic ring (6)
2.6 inc (12)
3. (1 sc, inc) * 6 (18)
4. (2 sc, inc) * 6 (24)
* so that the muzzle is voluminous, knit another row of 24 sc and fill it with filler when sewn to the head. Embroider the nose on the muzzle with the same yarn as the cap.
Regular stitches from bottom to top or vice versa, in several layers for volume.
For convenience, first embroider two stripes to know what size your nose will be. Do not embroider too large.
Ears, tail:
1.6 sc into magic ring (6)
2.6 inc (12)
3. – 4. 12 sc (12)
Fold, knit by both sides of knitting 6 sc.
* No need to stuff
Patches:
1.8 sc into magic ring (8)
Knit (3 sc in 1 loop, 1 sc) * 4, then knit square, knitting 3 sc in corners
We choose the size of the patch for the size of your toy
Cap:
* We knit the pompom separately
Blue
1.6 sc into magic ring (6)
2.6 inc (12)
3. – 5. 12 sc (12)
6. (1 sc, inc) * 6 (18)
7. – 9.18 sc (18)
10. (2 sc, inc) * 6 (24)
11. – 13. 24 sc (24)
14. (3 sc, inc) * 6 (30)
15. – 17.30 sc (30)
18. (4 sc, inc) * 6 (36)
19. – 21.36 sc (36)
22. (5 sc, inc) * 6 (42)
23. – 25. 42 sc (42)
26. (6 sc, inc) * 6 (48)
27. – 29. 48 sc (48)
30. (7 sc, inc) * 6 (54)
31. – 33.54 sc (54)
34. (8 sc, inc) * 6 (60)
35. – 37. 60 sc (60)
38. (9 sc, inc) * 6 (66)
39. – 41. 66 (66)
42. (10 sc, inc) * 6 (72)
43.72 sc (72)
White
44.72 sc (72)
Blue
45.72 sc
Pompon:
White
1.6 sc into magic ring (6)
2.6 inc (12)
3. (1 sc, inc) * 6 (18)
4. (2 sc, inc) * 6 (24)
5. (3 sc, inc) * 6 (30)
6. – 9.30 sc (30)
7. (3 sc, dec) * 6 (24)
8. (2 sc, dec) * 6 (18)
Fill with filler, sew to cap tip
Scarf:
For a scarf, dial a chain of 60 CH, and starting from the second loop from the hook, knit several (3-5) rows in rotary rows. We start the next rows from pp
* We choose the length of the scarf according to the size of your toy. The larger the CH chain, the longer the scarf Amigurumi Teddy bear
Assembly:
Sew the muzzle under the very eyes (do not stuff). Sew the ears between the 16-22 row of the head (the beginning of the row from the bottom). Sew the tail between about 8-10 near the body.
We embroider stitches on the forehead, tummy, on the sides of the arms and legs. For this we take black sewing threads of 4-6 threads. I do not advise taking too thick threads.
Sew the cap on the side of the head. Sew a decorative button to the scarf
Congratulations!
Your toy is ready!
