Amigurumi Nick The Turtle Free Pattern

Nick the turtle Attention !

The master class does not contain knitting lessons and is designed for those who have basic crochet skills. The complexity of this master class – average. The size of the finished toy when using the specified materials – about 13.5 cm.

Good day, dear friend!

Here is an instruction for knitting a cute little turtle named Nika. Thanks to this description, you can independently create beautiful and unique handmade toy. I wish you pleasant knitting and even loops!

Required materials and tools:

1. Yarn:

– Alize Cotton Gold 100g / 330m, color No. 385 (pistachio), No. 55 (white)

– YarnArt Jeans 50g / 160m, color No. 40 (brown), No. 54 (dark blue)

2. Hook number 2

3. Filler – holofiber

4. Beads for eyes with a diameter of 6 mm

5. Thick sewing needle, scissors, pins, knitting marker

6. A little black, white, pink thread for embroidery of the face

7. Buttons with a diameter of 6mm, satin ribbon – for decoration

Legend:

MR – amigurumi ring

Sc – single crochet

Ch – air loop

Sl-st – connecting post

İnc – increase

Dec – decrease

Dc – double crochet

(…) – the number in brackets means the number of loops in a row

(…) * X – repeat X times indicated in brackets

Head:

Stuff tightly as you knit.

1st row: 6Sc in MR

2nd row: İnc in each loop (12Sc)

3rd row: (1Sc, İnc) * 6 (18Sc)

4th row: 1Sc, İnc, (2Sc, İnc) * 5, 1 Sc (24Sc)

5th row: (3Sc, İnc) * 6 (30Sc)

6th row: 2Sc, İnc, (4Sc, İnc) * 5, 2Sc (36Sc)

7th row: (5Sc, İnc) * 6 (42Sc)

8th row: 3Sc, İnc, (6Sc, İnc) * 5, 3Sc (48Sc)

9-16 rows: 48Sc (8 rows)

17th row: 3Sc, Dec, (6Sc, Dec) * 5, 3Sc (42Sc)

18th row: (5Sc, Dec) * 6 (36Sc)

19 row: 2Sc, Dec, (4Sc, Dec) * 5, 2Sc (30Sc)

20 row: (3Sc, Dec) * 6 (24Sc)

21st row: 1Sc, Dec, (2Sc, Dec) * 5, 1Sc (18Sc)

Fasten and cut the thread, hide the tip of the thread inside the head

Torso:

Start knitting with a pistachio color. Stuff tightly as you knit.

1st row: 6Sc in MR

2nd row: İnc in each loop (12Sc)

3rd row: (1Sc, İnc) * 6 (18Sc)

4th row: 1Sc, İnc, (2Sc, İnc) * 5,

1Sc (24Sc)

5th row: (3Sc, İnc) * 6 (30Sc)

6th row: 2Sc, İnc, (4Sc, İnc) * 5,

2Sc (36Sc)

7th row: (5Sc, İnc) * 6 (42Sc)

8-11 rows: 42Sc (4 rows)

Change the thread color to white, cut off the pistachio thread.

Torso:

Start knitting with a pistachio color. Stuff tightly as you knit.

12th row: 42Sc

13th row: behind the back wall of the 42Sc loop

Change the thread color to dark blue, do not cut off the white thread.

14th row: (5Sc, Dec) * 6 (36Sc)

15th row: 36Sc

Change the thread color to white.

16th row: 36Sc

17th row: 2Sc, Dec, (4Sc, Dec) * 5, 2Sc (30Sc)

Change the thread color to dark blue.

Rows 18-19: 30Sc (2 rows)

Change the thread color to white, cut off the dark blue thread.

20 row: (3Sc, Dec) * 6 (24Sc)

21 row: 24Sc

Change the thread color to pistachio, cut off the white thread.

22 row: 1Sc, Dec, (2Sc, Dec) * 5, 1Sc (18Sc)

23rd row: 18Sc

Fasten the thread, cut, leaving a long end for sewing.

Pens :

Tie two pieces together. Fill to about halfway (no need to fill the top). Start knitting in brown.

1st row: 6Sc in MR

2nd row: İnc in each loop (12Sc)

3rd row: (3Sc, İnc) * 3 (15Sc)

Change the thread color to pistachio,

cut the brown thread.

4th row: behind the back wall of the loop 15Sc

5th row: 15Sc

6th row: Dec, 6Sc, Dec, 5Sc (13Sc)

7th row: 13Sc

8th row: Dec, 5Sc, Dec, 4Sc (11Sc)

9-11 rows: 11Sc (3 rows)

12th row: Dec, 4Sc, Dec, 3Sc (9Sc)

Tie two pieces together. Fill about halfway (top no need to fill). Start knitting in brown.

13-15 rows: 9Sc (3 rows)

Knit 4 more Sc (or any other amount of Sc needed to

so that when the handle is sewn, the color change is on the inside).

Fold the edges of the piece together, knit 4Sc.

Fasten the thread, cut, leaving a long end for sewing.

Legs:

Tie two pieces together. Tightly stuff in the knitting process, fill the upper part a little weaker (so that the legs are not strong sticking out when sewing). Get started knitting in brown.

1st row: 6Sc in MR

2nd row: İnc in each loop (12Sc)

3rd row: (1Sc, İnc) * 6 (18Sc)

Change the thread color to pistachio, cut off the brown thread.

4th row: behind the back wall of the 18Sc loop

5th row: 18Sc

6th row: (Dec, 7Sc) * 2 (16Sc)

7th row: 16Sc

8th row: (Dec, 6Sc) * 2 (14Sc)

9-11 rows: 14Sc (3 rows)

12th row: (Dec, 5Sc) * 2 (12Sc)

13-15 rows: 12Sc (3 rows)

16th row: (Dec, 4Sc) * 2 (10Sc)

17th row: (Dec, 3Sc) * 2 (8Sc)

Fasten the thread and cut, leaving a long tip with which pull off the remaining hole. Hide the tail of the thread inside the leg.

forming and assembling:

Decorate the muzzle. First, make tightening, focusing on the photo. For mark the location of the peephole with pins (points 1 and 2 in the photo), which are located between 12 and 13 row, the distance between points is 8Sc. Visually mark points 3 and 4 which are located on distance 1Sc from points 1 and 2, respectively.

Insert a long needle with thread into the base of the head and bring it into point 1. Then insert the needle at point 3 and bring it to the base of the head. For strength can be repeated tightening one more time.

Similarly, tighten the second eyes, but in this case from the base head, bring the needle out at point 2.

Then insert the needle at point 4 and bring it back to the base.

Pull the ends and tie a knot.

Sew eyes in the places of the ties – beads. Make a white thread stitches around the eyelet to look turned out to be more “alive”. Over embroider with eyes with black thread eyebrows, pink – cheeks (below the level of the peephole, between 14 and 15 beside).

Pin your head to torso.

Sew firmly in a circle, and when a small hole will remain – add more filler in between head and neck, then sew to end.

Between 6 and 7 near the torso outline the places where the legs are located. Sew them on with using a thread attachment. IN use the same thread as the yarn with which the body was knitted.

Skirt:

Attach a white thread and knit 12 rows by the front half-loops.

Knit in a circle, each row, starting with lifting sts and ending with Sl-st.

1st row: 3Ch, İnc from Dc to each loop (84 Dc)

2-3 rows: 3Ch, 84 Dc (84 Dc)

4th row: 1Ch, 84Sc (84Sc)

Fasten the thread, cut off, hide the end of the thread.

Between 20 and 21 side by side sew the handles symmetrically.

Sew on the front for decoration decorative buttons.

Carapace:

Bottom part:

1st row: 6Sc in MR

2nd row: İnc in each loop (12Sc)

3rd row: (1Sc, İnc) * 6 (18Sc)

4th row: 1Sc, İnc, (2Sc, İnc) * 5, 1 Sc (24Sc)

5th row: (3Sc, İnc) * 6 (30Sc)

6th row: 2Sc, İnc, (4Sc, İnc) * 5, 2Sc (36Sc)

7th row: (5Sc, İnc) * 6 (42Sc)

Finish knitting Sl-st, fasten the thread, cut, hide the end of the thread.

Top part:

1st row: 6Sc in MR

2nd row: İnc in each loop (12Sc)

Knit the third and all subsequent rows behind the back wall of the loop.

3rd row: (1Sc, İnc) * 6 (18Sc)

4th row: 1Sc, İnc, (2Sc, İnc) * 5, 1 Sc (24Sc)

5th row: (3Sc, İnc) * 6 (30Sc)

6th row: 2Sc, İnc, (4Sc, İnc) * 5, 2Sc (36Sc)

7th row: (5Sc, İnc) * 6 (42Sc)

8-9 rows: 42Sc (2 rows)

Do not cut the thread, but continue knitting.

Fold the two parts of the shell with the wrong side inward and connect, knitting 42 Sc. When there is a small hole, put it inside filler, fill not very tightly. Continue knitting and close hole to the end, do not cut the thread.

Cast a chain of 20 Ch, count down on the carapace 10Sc and in the 11th Sc attach the chain with a connecting post. Fasten the thread and cut off. From the first point (where the Ch chain was knitted) count 8Sc and attach a new thread into this loop.

Tie and attach the second strap in the same way.

Try on the carapace on the back, it should hold well (if the carapace dangles or, conversely, is difficult to dress, change the amount of Ch in straps).

Hide all the ends of the threads inside.

Panama:

1st row: 6Sc in MR

2nd row: İnc in each loop (12Sc)

3rd row: (1Sc, İnc) * 6 (18Sc)

4th row: 1Sc, İnc, (2Sc, İnc) * 5, 1 Sc (24Sc)

5th row: (3Sc, İnc) * 6 (30Sc)

6th row: 2Sc, İnc, (4Sc, İnc) * 5, 2Sc (36Sc)

7th row: (5Sc, İnc) * 6 (42Sc)

8th row: behind the back wall of the 42Sc loop

9th row: 42Sc

10th row: 3Sc, İnc, (6Sc, İnc) * 5, 3Sc (48Sc)

11th row: 48Sc

12th row: (7Sc, İnc) * 6 (54Sc)

13th row: 54Sc

14th row: behind the front wall of the loop (2Sc, İnc) * 18 (72Sc)

15th row: 72Sc

16th row: (11Sc, İnc) * 6 (78Sc)

17th row: 6Sc, İnc, (12Sc, İnc) * 5, 6Sc (84Sc)

Rows 18-19: 84Sc (2 rows)

Fasten the thread, cut off, hide the end of the thread.

For ties from the inside of the panama to the back half-loops of row 13 sew on (or tie) satin ribbons

Congratulations!

Your baby – Nick the turtle is ready!

I hope the process of creating it turned out to be easy for you and fascinating, and the result justified all your expectations!

Thanks for knitting with me! Until next time!

“Amigurumi Nick The Turtle Free Pattern” üzerine bir yorum

  1. Super ; je peux prévoir les cadeaux de Paques et Noel de mes petits enfants ; merci de votre gentillesse et de votre savoir faire

    Cevapla

Yorum yapın