Amigurumi Mr. Cat Free Pattern
Amigurumi Mr. Cat Free Pattern “Нerr katze”
With the declared materials, the toy turns out to be 31 cm in size with tailored to the height of the hat. The jacket is detachable, the hat can be made as removed or not. The toy stands at the expense of the tail.
Materials and tools:
Yarn Nako Bambino Marvel 50gr / 130m color – red (9004) consumption is very small
YarnArt Jeans yarn 50gr / 160m color – green (69) consumption is very small; cappuccino (71)
consumption less than 0.5 skein
Gazzal Cotton Baby yarn 50gr / 165m color – pumpkin (3416) consumption less than 0.5 skein
Yarn Pekhorka Children’s novelty 50gr / 200m color – black (02) consumption less than 0.5 skein;
cornflower (26) consumption less than 0.5 skein
Magic Angora Delicate yarn 100gr / 500m color – light gray (1128) consumption about 0.5 skein
Yarn Alize Angora Gold New 100gr / 550m color – ivory (599) consumption less than 0.5 skein
Filler synthetic fluff
Wire cross section 1.5mm
Polymer clay color – white (colorless); pink (light pink)
Buckle for doll wardrobe size 8 * 10mm golden color
Black fishing line
Black acrylic paint
Ready-made glass eyes (cabochons) 12mm
For tinting – shadows, pastels or paints
Hooks No. 2.5; 1.6; 2
Circular knitting needles and hosiery number 2.5
Glue gun
Superglue gel “Moment”
Knit sewing needle
Tinting brushes
Sparing slicker
Scissors; pin markers; row counter (optional);
insulating tape
Legend:
sc – single crochet
dc – double crochet
hdc – half double crochet
ch – air loop
sl-st – connecting post
p / p – half loop (back, front)
inc – increase for the hook: knit two from one column; for knitting needles: knit from one loop
two first behind the back wall, then behind the front wall of the hinge
dec – decrease for the hook: knit two stitches together in any way
chrome – edge loop
purl – front loop
knit – purl loop
pv – garter stitch: knit all front and back rows with front loops
lg – front stitch: front rows knit with front loops, purl rows – with purl loops
raglan – knit: reverse yarn, 2 knit stitches, reverse yarn
The materials used in this description are only recommendations in nature, so you can use any thread at your discretion.
Progress:
Hands:
Fingers (2 pcs each):
We start to knit from the third finger (last) crochet number 2
light gray yarn:
1.5 sc into magic ring (5)
2-3. 5 sc (5) Fasten and cut the thread.
Fingers second and first:
1.5 sc into magic ring (5)
2. (sc, inc) * 2 times, sc (7)
3-4. 7 sc (7) At the second finger, fasten the thread and cut it off, do not cut the thread from the first finger.
Hand-brush:
Change the hook to number 2.5, continue to knit with light gray yarn. At the beginning of the row, put a marker:
1.3 sc first, 3 sc second, 5 sc third, 4 sc second, 4 sc first (19)
2.19 sc (19)
3. (3 sc, inc) * 4 times, 2 sc, inc (24)
4-6. 24 sc (24)
7. (2 sc, dec) * 6 times (18) At this stage, we take the wire
with a diameter of 1.5 mm and a length of 35-40 cm, we make a frame of the hand, we wrap the junction of the ends of the wire with electrical tape and insert.
8. (sc, dec) * 6 times (12) Stuff the palm so that it is plump.
9-11. 12 sc (12)
12. (3 sc, inc) * 3 times (15) In the process we fill our hand.
13.15 sc (15)
Next, we will introduce black. For designation bl – black, gr – light gray.
14.9 sc gr, 5 sc bl, sc gr (15)
15-17. 15 sc gr (15)
18.11 sc gr, 3 sc bl, sc gr (15)
19-21. 15 sc gr (15)
22.9 sc gr, 5 sc bl, sc gr (15)
23-25. 15 sc gr (15)
26.2 sc gr, 4 sc bl, 3 sc gr, 5 sc bl, sc gr (15)
27-28. 15 sc gr (15) Fasten and cut the thread. We knit the other hand in the same way, but knit the stripes in a mirror, i.e. the rows are read from right to left. You can also randomly knit stripes.
Tail:
We begin to crochet No. 2.5 with light gray yarn:
1.6 sc into magic ring (6)
2.6 inc (12)
3. (sc, inc) * 6 times (18)
4. (2 sc, inc) * 6 times (24)
5-7. 24 sc (24)
8. (6 sc, dec) * 3 times (21)
9.21 sc (21)
Next, we will introduce black. The designations are indicated above.
10.21 sc bl (21)
11. (5 sc, dec) * 3 times gr (18)
12-14. 18 sc gr (18)
15. (4 sc, dec) * 3 times gr (15)
16.15 sc gr (15)
17-19. 15 sc bl (15)
20-27. 15 sc gr (15)
28-29. 15 sc bl (15)
30-33. 15 sc gr (15)
34. (3 sc, dec) * 3 times gr (12)
35-36. 12 sc gr (12)
37.12 sc bl (12)
38-42. 12 sc gr (12) Fasten and cut the thread.
Legs:
Fingers (2 pcs each):
We start knitting from the second and third fingers, they are knitted in the same way with crochet No. 2 with light gray yarn:
1.5 sc into magic ring (5)
2. (sc, inc) * 2 times, sc (7)
3-4. 7 sc (7) Fasten and cut the thread.
The fourth and first fingers are knitted in the same way:
1.5 sc into magic ring (5)
2-3. 5 sc (5) Fasten and cut the thread at the fourth finger, do not cut off the first.
Stop-toe:
Change the crochet hook to number 2.5 and continue knitting in light gray. At the beginning of the row, put a marker:
1.3 sc first, 4 sc second, 4 sc third, 5 sc fourth, 3 sc third, 3 sc second, 2 sc first (24)
2.24 sc (24)
3.3 dec, 7 sc, 2 dec, 9 sc (20)
4-5. 20 sc (20)
6.2 sc, 8 ch, skip 8 sc, from the 9th – 10 sc (20)
7.10 dec (10)
8. 5 dec (5) Pull the hole, fasten the thread and cut off.
We take a wire with a diameter of 1.5 mm and a length of 35-40 cm. We make a frame as in the photo. We insert the frame into the foot and fill the top of the foot tightly.
Leg:
We continue to crochet number 2.5. We start with a light gray color:
Turn the leg with the heel towards you and cling to the back (see photo):
1.16 sc (16)
2-7. 16 sc (16) In the next row we will enter black.
The designations are indicated above.
8.3 sc gr, 5 sc bl, 4 sc gr, 4 sc bl (16)
9.16 sc gr (16)
10. (4 sc, inc) * 3 times, sc gr (19)
11.4 sc gr, 6 sc bl, 4 sc gr, 5 sc bl (19)
12-13. 19 sc gr (19)
14.5 sc gr, 5 sc bl, 4 sc gr, 5 sc bl (19)
15.19 sc gr (19)
16.sc, (inc, 5 sc) * 3 times gr (22)
17.22 sc gr (22)
18.6 sc gr, 5 sc bl, 8 sc gr, 3 sc bl (22)
19.3 sc bl, 19 sc gr (22)
20-21. 22 sc gr (22) Fasten thread, cut off. Knit the second leg in the same way, but knit the stripes mirror-like, i.e. read rows from right to left. You can also randomly knit stripes.
Body:
Crochet # 2.5 with light gray yarn:
Fold your legs in half and define a central side loop at both legs. If this loop on the left leg does not coincide with the last one in the row, then make offset loops.
Knit 4 ch from left leg, attach chain to right leg with sl-st. Place a marker at the beginning of each row.
1.22 sc on the right leg, 4 sc on ch, 22 sc on the left leg, 4 sc on the back of the ch chain (52)
2.11 sc, inc, 25 sc, inc, 14 sc (54)
3.10 sc, inc, 2 sc, inc, 23 sc, inc, 2 sc, inc, 13 sc (58)
4.9 sc, inc, 6 sc, inc, 21 sc, inc, 6 sc, inc, 12 sc (62)
5.8 sc, inc, 10 sc, inc, 19 sc, inc, 10 sc, inc, 11 sc (66) At this stage, use electrical tape to connect both leg frames together (spine).
6-7. 66 sc (66)
Next, we will introduce black. The designations are indicated above.
8.15 sc gr, 12 sc bl, 8 sc gr, 12 sc bl, 19 sc gr (66)
9. (9 sc, dec) * 6 times gr (60)
10-11. 60 sc gr (60)
12. (8 sc, dec) * 6 times gr (54) In the next row we will knit a tail. In advance, you need to comb it with a slicker.
13.12 sc gr, 10 sc bl, 2 sc gr, 6 sc, capturing 6 sc tail loops gr, 3 sc gr, 11 sc bl, 10 sc gr (54)
14.24 sc gr, 6 sc tail gr, 24 sc gr (54)
15-16. 54 sc gr (54)
17. (7 sc, dec) * 6 times gr (48)
18.8 sc gr, 15 sc bl, 7 sc gr, 15 sc bl, 3 sc gr (48)
19-23. 48 sc gr (48)
24.13 sc gr, 6 sc bl, 20 sc gr, 7 sc bl, 2 sc gr (48)
25. (6 sc, dec) * 6 times gr (42)
26-27. 42 sc gr (42)
28. (5 sc, dec) * 6 times gr (36)
29.7 sc gr, 13 sc bl, 5 sc gr, 11 sc bl (36)
30.3 sc bl, 33 sc gr (36)
31. (4 sc, dec) * 6 times gr (30) Cut off the black thread. In the next row we will knit our hands, before that they need to be combed with a slicker.
Knit 3 offset loops and continue knitting with light gray thread:
32.7 sc, 5 sc with right-hand loops, 10 sc, 5 sc with left-hand loops, 3 sc (30)
33.7 sc, 10 sc at right-hand loops, 10 sc, 10 sc at left-hand loops, 3 sc (40)
Attach the arm frame to the spine frame, fix with electrical tape.
34. (8 sc, dec) * 4 times (36)
35. (4 sc, dec) * 6 times (30)
36. (3 sc, dec) * 6 times (24)
37.24 sc (24)
38. (2 sc, dec) * 6 times (18)
39-41. 18 sc (18) Fasten thread. Leave the tip for sewing on the head.
Head:
We start to crochet number 2.5 in light gray:
1.6 sc into magic ring (6)
2.6 inc (12)
3. (sc, inc) * 6 times (18)
4. (2 sc, inc) * 6 times (24)
5. (3 sc, inc) * 6 times (30)
6. (4 sc, inc) * 6 times (36)
Next, we enter black. The designations are indicated above.
7.5 sc gr, sc bl, 3 sc gr, sc bl, 26 sc gr (36)
8.8 sc gr, sc bl, 27 sc gr (36)
9.5 sc gr, inc from sc bl and sc gr, 5 sc gr, inc from sc bl and sc gr, (5 sc, inc) * 4 times gr (42)
10.8 sc gr, sc bl, 2 sc gr, sc bl, 30 sc gr (42)
11.7 sc gr, sc bl, 5 sc gr, sc bl, 2 sc gr, sc bl, 25 sc gr (42) Cut off the black thread and continue knitting with light gray thread.
12. (6 sc, inc) * 6 times (48)
13-14. 48 sc (48)
15. (7 sc, inc) * 6 times (54)
16.54 sc (54)
17. (8 sc, inc) * 6 times (60)
18-22. 60 sc (60)
23. (dec, 8 sc) * 6 times (54)
24. (dec, 7 sc) * 6 times (48)
25. (dec, 6 sc) * 6 times (42)
26. (dec, 5 sc) * 6 times (36)
27.36 sc (36)
28. (4 sc, dec) * 6 times (30)
29. (3 sc, dec) * 6 times (24) Stuff the head.
30. (2 sc, dec) * 6 times (18)
31. (sc, dec) * 6 times (12)
32.6 dec (6) Finish off the head, pull off the hole, fasten the thread and cut off.
Muzzle:
The muzzle has three parts.
Part one:
Crochet # 2.5 with ivory yarn. We collect 12 ch, we begin to knit in the 2nd from the hook:
1.inc, 9 sc, 4 sc on the last loop of the chain, 9 sc on the back of the chain, inc (26)
2.3 inc, 7 sc, 6 inc, 7 sc, 3 inc (38)
3. (inc, sc) * 2 times, 2 inc, 7 sc, 2 inc, (sc, inc) * 2 times, (inc, sc) * 2 times, 2 inc, 7 sc, 2 inc, (sc, inc) * 2 times (54)
4. (8 sc, inc) * 6 times (60)
5.60 sc (60)
6. (4 sc, inc) * 12 times (72)
7.72 sc (72) Fasten thread. Leave the tip for sewing.
Part two:
Crochet # 2.5 with ivory thread. We collect 5 ch, start knitting from the 2nd loop from the hook:
1.inc, 2 sc, 4 sc in the last loop of the chain, 2 sc on the back, inc (12)
2.2 inc, 2 sc, 4 inc, 2 sc, 2 inc (20)
3. (3 sc, inc) * 5 times (25)
4-6. 25 sc (25) Fasten thread. Leave the tip for sewing.
Next, we pin the first part to the head with pins, counting 14 rows from the crown. Sew on. On top of the first part, pin the second part. We start to sew. When a small hole remains, fill it loosely, sew it up. Make a tightening in the middle of the second part in black. Tighten the knot from the tightening at the top, where the nose will be attached.
Part three:
Crochet # 2.5 with yarn
ivory:
1.6 sc into magic ring (6)
2.6 inc (12)
3. (sc, inc) * 6 times (18)
4-5. 18 sc (18)
6. (sc, dec) * 6 times (12)
7. 12 sc (12) Stuff very sparsely. Fold in half and work 5 sc behind both sides. Fasten the thread and leave the tip for sewing.
Sew the third piece under the second piece at the bottom. On the sides, also grab a couple of stitches so that the mouth turns out to be monolithic.
Ears:
The ears are made up of two pieces that fit in the same way. Tie two parts – one in color
ivory, the second with a light gray thread.
With crochet number 2.5, dial 4 ch, knit in the 2nd from the hook:
1.dc, hdc, 5 sc in the last loop of the chain, hdc, dc (9), 2 ch rises, turn
2.dc, hdc, sc, 3 inc, sc, hdc, dc (12), 1 ch lift, turn
3. 12 sc (12) Fasten the thread. From ivory detail
cut off the thread, from the light gray part – leave the tip for sewing.
Fold both parts seamy side in to each other and knit
black crochet hook No. 2.5:
(sc, inc) * 6 times (18) Fasten thread, cut off.
Comb your ears before sewing on. Comb your head. Only then sew on the ears.
Eyes, nose:
Form an oblong base from white or colorless clay. Press the finished cabochons into the blanks. Touch up with tools. Bake according to the instructions or boil. Sculpt the nose out of pink clay. In the process of sculpting, try on the eyes and nose. You can read how to weld small parts from clay here: https://vk.com/wall200200680_59 After the eyes are ready, gently paint eyeliner with a thin brush at the top of the eyes with black paint.
Glue the eyes and nose with superglue gel. We comb the body with a slicker. You can tint the muzzle. Shade the mouth or make it darker, like mine.
Cut off three pieces of fishing line, thread through the face, pull the mustache down and fix with superglue gel. Sew the head to the body.
Your cat is ready!
A cap:
We knit with a crochet No. 2.5 in the color of cornflower:
1.6 sc into magic ring (6)
2.6 inc (12)
3. (sc, inc) * 6 times (18)
4.18 sc (18)
5.18 sc for back p / p (18)
6. (2sc, inc) * 6 times (24)
7-9. 24 sc (24)
10. (3 sc, inc) * 6 times (30)
11-13. 30 sc (30)
fourteen. . (4 sc, inc) * 6 times (36)
15. (sc, inc) * 18 times per front p / p (54)
16.54 sc (54)
17.. (8 sc, inc) * 6 times (60)
18.60 sc (60) Fasten thread, cut off.
Hat strip:
Crochet # 2.5 in red. Cast on 42 ch and tie three rows of sl-st behind back st. Pass the buckle through the strip.
Sew. Glue the strip to the cap with a heat gun.
The cap can also be glued to the head if you don’t want it to fall off all the time.
Pumpkin:
I borrowed the description of the pumpkin from another master from the Internet in the public domain.
Therefore, I do not attribute the authorship to myself. Crochet No. 1.6. We start to knit in green
color:
1.6 sc into magic ring (6)
2-7. 6 sc (6)
8.6 inc (12)
9. (sc, inc) * 6 times (18)
10-11. 18 sc (18) Cut off the green thread, continue knitting with the pumpkin thread:
12. (sc, 3 dc in one loop, sc) * 6 times (30)
13. (sc, dc, 3 dc in one loop, dc, sc) * 6 times (42)
14. (sc, 2 dc, 3 dc in one loop, 2 dc, sc) * 6 times (54)
15. (sc, 3 dc, 3 dc one loop, 3 dc, sc) * 6 times (66)
16-19. (sc, 9 dc, sc) * 6 times (66)
20. (sc, 3 dc, 3 dc together, 3 dc, sc) * 6 times (54)
21. (sc, 2 dc, 3 dc together, 2 dc, sc) * 6 times (42)
22. (sc, dc, 3 dc together, dc, sc) * 6 times (30)
23. (sc, 3 dc together, sc) * 6 times (18)
24.18 sc (18) Stuff the pumpkin.
25. (sc, dec) * 6 times (12)
26.6 dec (6) Pull the hole, fasten the thread and cut off.
Leaf:
Crochet # 1.6 with green thread. Here I do not indicate the number of loops at the end, because the knitting is partially circular. Cast on 9 ch, 2nd from the hook:
1.7 sc, 3 sc on the last loop of the chain, 6 sc, inc
We continue knitting in a circle:
2.7 sc, 2 ch lift, turn
3.sc in 3rd loop from hook, 6 sc, inc, sc, inc, 5 sc, 2 ch lifts, turn
4.sc in 3rd loop from hook, 6 sc, inc, 2 sc, inc, 3 sc, 2 ch lifts, turn
5.sc in third loop from hook, 12 sc, 2 ch, turn
6. sc in the third loop from the hook, 6 sc fasten the thread. Leave the tip for sewing.
Sew a leaf to the pumpkin. Press it to the body of the pumpkin and grab it with a drop of hot melt glue so that the leaf does not bulge.
Blazer:
We will knit with circular knitting needles No. 2.5 with cappuccino-colored yarn.
On the needles we collect 27 loops + 2 chrome
Knit the zero row with knit loops, then continue:
1.chrome, 2 pv loops, 1 purl, raglan, 3 purl, raglan, 7 purl, raglan, 3 purl, raglan, 1 purl, 2 pv loops, chrome (37)
We knit the yarn over with knit loops. We knit all even rows according to the pattern.
2.chrome, 2 pv loops, 31 knit, 2 pv loops, chrome (37)
3.chrome, 2 pv hinges, 2 purl, raglan, 5 purl, raglan, 9 purl, raglan, 5 purl, raglan, 2 purl, 2 pv chrome loops (45)
5.chrome, 2 pv loops, 3 purl, raglan, 7 purl, raglan, 11 purl, raglan, 7 purl, raglan, 3 purl, 2 pv loops, chrome (53)
7.chrome, 2 pv loops, 4 purl, raglan, 9 purl, raglan, 13 purl, raglan, 9 purl, raglan, 4 purl, 2 pv loops, chrome (61)
9.chrome, 2 pv loops, 5 purl, raglan, 11 purl, raglan, 15 purl, raglan, 11 purl, raglan, 5 purl, 2 pv loops, chrome (69)
11.chrome, 2 pv loops, 6 purl, raglan, 13 purl, raglan, 17 purl, raglan, 13 purl, raglan, 6 purl, 2 pv loops, chrome (77)
13.chrome, 2 pv loops, 7 purl, raglan, 15 purl, raglan, 19 purl, raglan, 15 purl, raglan, 7 purl, 2 pv loops, chrome (85)
15.chrome, 2 pv loops, 8 purl, raglan, 17 purl, raglan, 21 purl, raglan, 17 purl, raglan, 8 purl, 2 pv loops, chrome (93)
17.chrome, 2 pv loops, 9 purl, raglan, 19 purl, raglan, 23 purl, raglan, 19 purl, raglan, 9 purl, 2 pv loops, chrome (101)
18.chrome, 2 pv loops, 95 knit, 2 pv loops, chrome (101)
19.chrome, 2 pv sts, 11 purl, 23 loops on a thread, cast on 2 loops under the future sleeve, 27 purl, 23 loops on a thread, cast on 2 loops under the future sleeve, 11 purl, 2 pv, chrome (59 )
21.chrome, 2 pv loops, 11 purl, 2 inc, 27 purl, 2 inc, 11 purl, 2 pv loops, chrome (63)
23.chrome, 2 pv loops, 11 purl, (inc, purl) * 2 times, 27 purl, (purl, inc) * 2 times, 11 purl, 2 pv loops, chrome (67)
25-34. chrome, 2 pv loops, 59 lg, 2 pv loops, chrome (65)
35. close the loops with crochet number 2.5.
Sleeves:
You need to cast on 27 stitches of the sleeves. So that it was
more convenient – take stocking needles number 2.5.
Distribute 9 stitches on three knitting needles. Do not close knitting in a circle!
We knit in straight and reverse rows. Tie 14 rows of lies. Close the edge with crochet hook No. 2.5.
Sew the sleeves with a mattress seam with a knitted needle. Close up all the threads on the seamy side.
The jacket is ready!
We dress the cat in a jacket and send it to a photo session!
Remember that only your toy is individual and unique!
Thank you for the attention!
