Amigurumi Good BULL Free Pattern
“Good goby” Amigurumi Good BULL
Amigurumi Good BULL Difficulty: medium
I wish you light loops and creative enthusiasm!
To knit a toy, you need yarn of the following shades (for a toy,
Light gray – basic (for body)
Soft pink – for the face
Flesh light – for horns
Fleshly dark – for hooves
For clothes:
Dark emerald
White
Red poppy
Blue
Neon
Salmon
Purple
Some wool yarn for bangs (I cut about 30 threads) gray, light gray or white.
Safety eyes 12 mm. I have sewn ones with a white bow. If you use eyes of a smaller diameter, then felt for proteins is needed eye – cut out circles with a diameter of 15-17 mm and make a hole in them, in which insert the peephole mount.
I glued the eyelashes to the inside of the eyelet with Moment glue.
Hook 2.00
Buttons for panties 2 pcs. at your discretion
Stitching needle
Cardboard for insoles
When using these materials, the height of the toy is about 35 cm
Legend:
MR – amigurumi ring
CH – air loop
LOOP – lifting loop
SC. – single crochet
SL-ST – connecting post
HDC – half double crochet
İNC. – increase
DEC. – decrease
We knit the details in a circle, connecting the rows of SL-ST. Each new row starts with CH lifting.
When knitting parts connected in a spiral, MK has a special indication of this knitting method.
-HEAD
We start knitting with light pink yarn
1 row – 6 SC. In MR
2 row – (İNC.) * 6 – (12)
3 row – (1 SC., İNC.) * 6 – (18)
4 row – (2 SC., İNC.) * 6 – (24)
5 row – (3 SC., İNC.) * 6 – (30)
6 row – (4 SC., İNC.) * 6 – (36)
7 row – (5SC., İNC.) * 6 – (42)
8 row – (6 SC., İNC.) * 6 – (48)
9 row – (7 SC., İNC.) * 6 – (54)
10-11 rows – 54 SC each.
12 row – (7 SC., DEC.) * 6 – (48)
Change the thread to light gray
Row 13 – 48 SC.
14 row – (7 SC., İNC.) * 6 – (54)
15 row – 12 SC., DEC., 25 SC., DEC., 13 SC. – (52)
16 row – 12 SC., DEC., 24 SC., DEC., 12 SC. – (fifty)
17 row – 11 SC., DEC., 23 SC., DEC., 12 SC. – (48)
18 row – 11 SC., DEC ,. 22 SC., DEC., 11 SC. – (46)
19 row – 11 SC., DEC., 21 SC., DEC., 10 SC. – (44)
Row 20 – 10 SC., DEC., 20 SC., DEC., 10 SC. – (42)
21 row – (5 SC., DEC.) * 6 – (36)
22-24 rows – 36 SC each.
Start stuffing the part.
25 row – DEC., 14 SC., 7 İNC. HDC, 13 SC. – (42)
Rows 26-33 – 42 SC each.
34 row – (DEC., 5 SC.) * 6 – (36)
35 row – (DEC., 4 SC.) * 6 – (30)
If you have prepared eyes not sewn on, but with fasteners, then now
it’s time to insert them into the canvas. Insert the eyes between the 24th and 25th rows.
36 row – (3 SC., DEC.) * 6 – (24)
37 row – (DEC., 2 SC.) * 6 – (18)
38 row – (1 SC., DEC.) * 6 – (12)
Fill the detail to the end.
39 row – (DEC.) * 6 – (6)
Pull the hole, cut the thread and hide the tip with a needle in the part.
NOZDRI 2 details
1 row – 5 SC. In MR – (5) the ring should not be tightened too much, since we will knit next row
2nd row – at the same MR 12 SC. – (12)
The tip of the thread left over from tightening MR to bring on seamy side. Tighten the loop is tighter. Sew nostrils we will purl side out.
UNDERLIP
1 row – 6 SC. in MR – (6)
2 row – (İNC.) * 6 – (12)
3 row – (1 SC., İNC.) * 6 – (18)
4 row – (2 SC., İNC.) * 6 – (24)
5-6 rows – 24 SC each.
Fold and knit detail for both walls 12 SC.
LANGUAGE (red thread)
In MR 2 SC., 2 HDC, 2 SC. – (6)
Sew the tongue to the inside of the lip.
Sew the lower lip to head, combining the lower part of the lip with the lower part muzzles. Sew on the edges of the lip too, leaving not sewn only the central part.
Sew on nostrils on both sides of the muzzle (see photo)
We knit the HORNS in a spiral – 2 parts (light-bodied thread)
10 CH close in a ring
1-2 rows – 10 SC each.
3 row – 2 SC., DEC., 2 SC., 4 SL-ST – (9)
4th row – 9 SC.
5 row – 2 SC., DEC., 1 SC., 4 SL-ST – (8)
6 row – 8 SC.
7 row – 1 offset loop; DEC., 1 SC., 4 SL-ST – (7)
8-9 rows – 7 SC each.
10 row – 2 SC., DEC., 3 SC. – (6)
11 row – decreases to the end.
Pull off, hide the thread.
Fill the horns evenly and not too tightly.
Sew on between 32 and 36 rows of the head
EARS 2 parts
1 row – 6 SC. In MR – (6)
2nd row – 6 SC.
3 row – (1 SC., İNC.) * 3 – (9)
4th row – 9 SC.
5 row – (2 SC., İNC.) * 3 – (12)
6 row – (3 SC., İNC.) * 3 – (15)
7 row – 15 SC.
8 row – (4 SC., İNC.) * 3 – (18)
9 row – (5 SC., İNC.) * 3 – (21)
10 row – 21 with bn.
11 row – (5 SC., DEC.) * 3 – (18)
12 row – (DEC., 4 SC.) * 3 – (15)
13 row – (3 SC., DEC.) * 3 – (12)
Row 14 – 12 SC.
Do not stuff the ears, fold in half and sew. Fold back when sewing in half. Sew under the horns.
Cut the woolen thread for the bangs and attach between the horns to your discretion.
LEGS 2 parts
We start with white yarn
Dial a chain of 7 CH + 1 LOOP
1 row – in the 2nd st. From the hook: İNC., 5 SC., 4 SC. In one loop, 5 SC., İNC. – (eighteen)
2nd row – 1 SC., İNC., 4 SC., 6 İNC., 4 SC., İNC., 1 SC. – (26)
3 row – 2 SC., İNC., 4 SC., (1 SC., İNC.) * 6, 4 SC., İNC., 2 SC. – (34)
4 row – İNC., 9 SC., İNC., (2 SC., İNC.) * 5, 8 SC – (41)
5 row – İNC., 40 SC – (42)
Cut out the insole.
6 row – behind the back wall of the loop – 42 SC.
Change to a red thread.
7-9 rows – 42 SC each.
10 row – 12 SC., DEC, (2 SC., DEC.) * 5, 8 SC. – (36)
11 ppoison – 36 SC.
12 row – 11 SC., DEC., (1 SC., DEC.) * 5, 8 SC. – (thirty) Insert insole
Row 13 – 10 SC., 6 DEC., 8 SC. – (24)
Row 14 – 24 SC.
15 row – (2 SC., DEC.) * 6 – (18)
Row 16 – 18 SC.
Change to white thread
17 row – 18 SC.
Row 18 – for the front wall – 18 SC.
19-20 rows – 18 SC each.
Cut the white thread. We hide the tip.
Unscrew the top of the shoe and continue knitting the leg with light gray thread.
Fill the boots tightly.
Row 18 – 18 SC. for the left half loops of 18 rows
19-24 rows – 18 SC each.
Change the thread to dark emerald and start knit trousers.
25 row – behind the back walls
loops – 18 SC.
On the front hinges later knit the lapel of the legs 4 rows and sew to the 2nd row trousers – it will work small roll-up lapel
26-30 rows – 18 SC each. Finish work, thread trim.
TRUNK
Thread color – dark emerald
1 row – 6 SC. in MR
2 row – (İNC.) * 6 – (12)
3 row – (1 SC., İNC.) * 6 – (18)
We begin to tie the legs. To do this, fold the leg in half, the fold lines at
This is located like this: the back is the middle of the heel, the front is the middle of the toe.
Find the middle 4 loops – for them we will tie the legs to the body. Look, so that the legs look straight.
4th row – 1 SC on the body, 4 SC. simultaneously with the left leg and trunk, 5 SC. by body, 4 SC. simultaneously with the right leg and trunk, 4 SC.
5 row – 1 SC., İNC., 14 SC. on the left leg, İNC., 5 SC. on the trunk, İNC., 14 SC. by right leg, İNC., 4 SC. – (46)
6 row – 2 SC., İNC., 7 SC., İNC., 7 SC., İNC., 2 SC., (İNC.) * 2, 2 SC., İNC., 7 SC., İNC., 7
SC., İNC., 2 SC., (İNC) * 2 – (56)
7 row – 56 SC.
8 row – (1 SC., İNC.) * 2, 17 SC., * İNC., 10 SC., İNC. * (From * to * – formation tummy), 17 SC., İNC., (1 SC., İNC.) * 2, 1 SC. – (63)
9-12 rows – 63 SC each.
13 row – 25 SC., * İNC., 5 SC., İNC., 5 SC., İNC. * (From * to * – formation of the tummy),
25 SC. – (66)
14-18 rows – 66 SC each.
19 row – (1 SC., DEC.) * 3, 48 SC., (1 SC., DEC,) * 3 – (60) – formed a butt
20-21 rows – 60 SC each.
Change the thread to a blue thread and start knitting a T-shirt
Row 22 – knit 60 SC on the back of the stitches.
23 row – (8 SC., DEC.) * 6 – (54)
Row 24 – 54 SC.
Change the thread to white
Rows 25-26 – 54 SC.
27 row – (7 SC., DEC.) * 6 – (48)
Change the thread to neon
28-30 rows – 48 SC each.
Change the thread to white
Next, we knit in rotary rows.
44 row – 11 SC., SL-ST, 1 CH, turn In SL-ST of the previous row 1st SC. do not knit
31 row – (6 SC., DEC.) * 6 – (42)
32-33 rows – 42 SC each.
Change the thread to salmon
34 row – (5 SC., DEC.) * 6 – (36)
35-36 rows – 36 SC each.
Change the thread to white
37 row – (4 SC., DEC.) * 6 – (30)
Rows 38-39 – 30 SC each.
Change the thread to lilac
40 row – (3 SC., DEC.) * 6 – (24)
41-42 rows – 24 SC each.
Change the thread to light gray
43 row – 24 SC.
45 row – 12 SC., SL-ST, 1 CH, turn. The last SC. we knit at the same point, where the SL-ST of the previous row was knitted
46 row – 13 SC., SL-ST, 1 CH, turn
47 row – 14 SC., SL-ST, 1 CH, turn
48 row – 15 SC., SL-ST, 1 CH, turn
49 row – 16 SC., SL-ST, 1 CH, turn – ten
Row 50 – knit 24 SC, finish with SL-ST. Leave the long end of the thread for sewing on the head.
Stuff the body well, not forgetting about the legs. Check filling. If everyone suits, then you can sew on the head (see photo).
HANDLES 2 parts
We start with the hooves – the yarn is dark beige.
1 row – 6 SC. in MR – (6)
2 row – (İNC.) * 6 – (12)
3 row – (1 SC., İNC.) * 6 – (18)
4-6 rows – 18 SC each.
7 row – (4 SC., DEC.) * 3 – (15)
Change the thread to light gray
8 row – 5 SC., (DEC.) * 2, 5 SC., İNC. – (14)
9 row – İNC., 13 SC. – (15)
10-13 rows – 15 SC each.
14 row – (İNC. HDC) * 2, 6 SC., (DEC.) * 2, 3 SC. – (15)
15 row – 15 SC.
16 row – (DEC. HDC) * 2, 6 SC., (İNC.) * 2, 3 SC. – (15)
17 – 19 rows – 15 SC each.
Change to salmon thread
20-22 rows – 15 SC each.
Change to white thread
23-25 rows – 15 SC each.
The part can be started to fill.
Strengthen the hoof by putting in him, for example, flat button of suitable diameter (d matches the first three rows of details). Or put suitable in diameter a coin, then the toy will be meaning – bringing wealth
Change to lilac thread
Row 26 – 15 SC.
27 row – (3 SC., DEC.) * 3 – (12)
Fill the detail to the end.
28 row – (DEC.) * 6 – (6) Pull off the hole.
Now you need to make tightening, forming the hoof. To do this, enter igloo in marked on the photo red beads dots, connecting them.
Please note that the back hoof wall remains smooth.
Sew on handles on both sides torso, observing color stripes of clothing.
TAIL We knit a part in a spiral
1 row – 5 SC. in MR
Rows 2-24 – 5 SC each.
Finish work SL-ST. At the tip of the tail, attach the threads to each SC.
STRAPS OF STANISHES 2 parts
45 CH
1 row – 44 SC. Work
finish, sew on each back strap left threads. Webbing criss-cross on the back.
Sew on the front straps with using buttons.
Sew on the tail.
The good goby is ready!
I wish him good hands!
