Amigurumi Bunnies-Ears Free Pattern
Bunnies-Ears!
I WISH YOU A PLEASANT KNITTING!
LIST OF MATERIALS REQUIRED
1. YarnArt JEANS yarn shade 80/05 (gray / beige),
01 (white), 77 (orange), 52 (green)
2. Threads of floss or Iris of pink, black and brown colors for the decoration of the muzzle.
3. Hook No. 2 and 2.5.
4. Filler (holofiber, synthetic fluff).
5. Eyes 8 mm on the secure mount.
6. Joint for attaching the head 2.5 cm (optional)
7. Long needle with a large eye for tightening and threading.
8. Needle for sewing together toy parts.
9. Scissors.
When using the specified materials and medium density
knitting toy turns out to be about 14 cm tall without ears and 27 cm with ears.
SYMBOLS
Sc – single crochet
İnc – increase (2 Sc in one loop)
Dec – decrease (2 Sc together)
Ch – air loop
Sl-st – connecting post
the offset loop is always the first loop of the row (knits like
Sc), but then the second loop that follows it is considered already
first loop. With it, we align the knitting. A loop
displacement is not included in the total loop count for the circuit.
HEAD
Start knitting with your base color.
1st row: 6 Sc in amigurumi ring (6)
2nd row: increase * 6 times (12)
3rd row: (1 Sc, İnc) * 6 times (18)
4th row: (2 Sc, İnc) * 6 times (24)
5 row: (3 Sc, İnc) * 6 times (30)
6 row: (4 Sc, İnc) * 6 times (36)
7 row: (11 Sc, İnc) * 3 times (39)
8 row: (12 Sc, İnc) * 3 times (42)
9-12 row (4 rows): 42 Sc (42)
13 row: İnc, 8 Sc, 8 İnc, 7 Sc (in the center loop of these seven put
marker is the center of the muzzle), 8 İnc, 8 Sc, İnc, 1 Sc (60)
14-19 row (6 rows): 60 Sc (60)
At this point, insert the safety eyes between the 12th and 13th rows of the head at a distance of 7 Sc, focusing on the center of the muzzle.
20 row: (1 Sc, Dec) * 20 times (40)
Row 21: (2 Sc, Dec) * 10 times (30) Start filling the head.
22 row: (3 Sc, Dec) * 6 times (24)
23 row: (2 Sc, Dec) * 6 times (18)
If you plan to use the joint to attach the head, insert one
part (disc with screw) into the head at this point.
If you are not using a joint, skip this step and just continue knitting.
Before inserting the joint, fill the head all the way, very tightly, forming the cheeks.
24 row: (1 Sc, Dec) * 6 times (12)
25 row: decrease * 6 times (6)
Cut the thread, tighten the hole around the screw. Hide the thread.
DECORATION OF THE MUD
First you need to pull the muzzle.
For this it is necessary to mark the points through which you will do tightening.
Points A and B, C and D are located near the toy peephole, points D and E
in the middle of the face between 20 and 21 in rows.
Distance between row standing points – 1 Sc. Enter thread to point D, output to point B
(the end of the thread should remain visible from point D). For convenience, I
I will write the points in turn of the introduction and withdrawal of the needle. So: D
– (B – A – D – E – C – D – E – D) * repeat 2-3 times.
Thus, you pulled the mouth of the toy, now you need to pull your eyes between
yourself: (A – D – C – B) * repeat 2 times. Tighten the thread.
Bring the thread out at point D, tie both ends and hide. The tightening is ready.
Next, embroider the whites of the eyes, eyelashes, eyebrows and nose of the toy.
How I do it, you can watch the video on Instagram (in
publications with MK stages).
EARS (2 pieces)
Start crocheting a larger thread with the main color
size (I have a hook number 2.5). Knit loosely enough
to make the eyelet heavier.
1st row: 6 Sc in amigurumi ring (6)
2nd row: increase * 6 times (12)
3rd row: (1 Sc, İnc) * 6 times (18)
4th row: (8 Sc, İnc) * 2 times (20)
5 row: 1 Sc, İnc, 9 Sc, İnc, 8 Sc (22)
6-9 row (4 rows): 22 Sc (22)
10 row: (Dec, 9 Sc) * 2 times (20)
11-13 row (3 rows): 20 Sc (20)
14 row: (Dec, 8 Sc) * 2 times (18)
15-17 row (3 rows): 18 Sc (18)
18 row: (Dec, 7 Sc) * 2 times (16)
19-23 row (5 rows): 16 Sc (16)
24 row: (Dec, 6 Sc) * 2 times (14)
25-29 rows (5 rows): 14 Sc (14)
30 row: (Dec, 5 Sc) * 2 times (12)
31-37 row (7 rows): 12 Sc (12)
Fold the base of the ear in half,
knit 6 Sc together. Cut the thread
leave the end for sewing.
For the ears to be less
“Standing” be sure to steam them
iron, slightly stretching the canvas.
TRUNK
The body is knitted from top to bottom.
Start knitting with your base color.
1st row: 6 Sc in amigurumi ring (6)
Tighten the amigurumi ring not tightly, so that you can
was to insert a screw from the joint.
2nd row: increase * 6 times (12)
3rd row: (1 Sc, İnc) * 6 times (18)
4th row: (2 Sc, İnc) * 6 times (24)
5 row: (7 Sc, İnc) * 3 times (27)
6 row: 3 Sc, İnc, (8 Sc, İnc) * 2 times, 5 Sc (30)
7 row: (9 Sc, İnc) * 3 times (33)
Attach the base of the torso to the head by slipping it over the screw
joint and securing with a plug. To make it easier
to do, pass a knitting needle through your head (at the very base, straight
above the joint disc), and when joining the torso, lean
on this spoke.
…
Continue knitting the torso
8 row: 4 Sc, İnc, (10 Sc, İnc) * 2 times, 6 Sc (36)
9 row: (11 Sc, İnc) * 3 times (39)
10 row: 5 Sc, İnc, (12 Sc, İnc) * 2 times, 7 Sc (42)
11 row: 12 Sc, 2 İnc, 28 Sc (44)
12th row: 13 Sc, 2 İnc, 29 Sc (46)
13 row: 14 Sc, 2 İnc, 30 Sc (48)
If you are not using a head joint, mark
the increments in rows 11-13 are the center of the back of the toy.
14-21 row (8rows): 48 Sc (48)
22 row: 2 Sc, Dec, (6 Sc, Dec) * 5 times, 4 Sc (42)
Row 23: (5 Sc, Dec) * 6 times (36) Start filling the torso.
24 row: 1 Sc, Dec, (4 Sc, Dec) * 5 times, 3 Sc (30)
25 row: (3 Sc, Dec) * 6 times (24)
26 row: (2 Sc, Dec) * 6 times (18)
27 row: (1 Sc, Dec) * 6 times (12)
28 row: decrease * 6 times (6)
Cut the thread, pull off the hole. Hide the thread.
LEGS (2 pieces)
Start knitting with white thread. Dial 6 Ch, start
knit from the second loop from the hook.
1st row: İnc, 3 Sc, 4 Sc in one loop, 4 Sc (13)
2nd row: 2 İnc, 2 Sc, 6 İnc, 2 Sc, İnc (22)
3rd row: (1 Sc, İnc) * 2 times, 2 Sc, (1 Sc, İnc) * 6 times, 3 Sc, İnc (31)
Work two offset loops.
4-6 row (3 rows): 31 Sc (31)
7 row: Dec, 29 Sc (30)
8 row: 7 Sc, 8 Dec, 7 Sc (22)
Row 9: 7 Sc, 4 Dec, 7 Sc (18)
10 row: 7 Sc, 2 Dec, 7 Sc (16)
11 row: 7 Sc, Dec, 7 Sc (15)
Change the thread to your base color.
12-18 row (7 rows): 15 Sc (15)
19 row: (3 Sc, Dec) * 3 times (12)
20 row: decrease * 6 times (6)
Cut the thread, pull off the hole. Hide the thread.
HANDLES (2 pieces)
Start knitting with white thread.
1st row: 6 Sc in amigurumi ring (6)
2nd row: increase * 6 times (12)
3rd row: (3 Sc, İnc) * 3 times (15)
4-5 row: 15 Sc (15)
6 row: 1 Dec, 2 Sc, 1 Dec, 9 Sc (13)
7 row: 2 Dec, 9 Sc (11)
8 row: 1 Dec, 9 Sc (10)
Change the thread to your base color.
9-17 row (9 rows): 10 Sc (10)
18 row: decrease * 5 times (5)
Cut the thread, pull off the hole. Hide the thread.
TAIL
Knit with white thread.
1st row: 6 Sc in amigurumi ring (6)
2nd row: increase * 6 times (12)
3rd row: (1 Sc, İnc) * 6 times (18)
4th row: decrease * 9 times (9)
Fasten the thread, cut, leave a long end for sewing.
Lightly fill the tail with filler.
ASSEMBLING THE TOY
Sew the ears to the head, placing them at the base at an angle
to each other, and then lightly grab each other to
give them shape (see photo)
Attach the arms and legs with a thread mount –
legs between 10 and 11 rows of the torso (bottom), arms between 23 and
24 rows (bottom). How do I thread fastening the feet, you can
Sew the tail between 10-13 rows of the body (bottom)
Tinted cheeks. The bunny is ready!
CARROT
Start knitting with orange thread.
1st row: 6 Sc in amigurumi ring (6)
2nd row: (1 Sc, İnc) * 3 times (9)
3rd row: 9 Sc (9)
4th row: (2 Sc, İnc) * 3 times (12)
5 row: 12 Sc (12)
6 row: (3 Sc, İnc) * 3 times (15)
7 row: 15 Sc (15)
8 row: (4 Sc, İnc) * 3 times (18)
9 row: 18 Sc (18)
10 row: (5 Sc, İnc) * 3 times (21)
11 row: 21 Sc (21)
12 row: (6 Sc, İnc) * 3 times (24)
13-17 row (5 rows): 24 Sc (24)
18 row: (2 Sc, Dec) * 6 times (18)
19 row: (1 Sc, Dec) * 6 times (12)
20 row: decrease * 6 times (6)
Cut the thread, pull off the hole. Hide the thread.
Attach the green thread to the last row with
with Sl-st, * knit 20 Ch, then Sl-st again in the last row
main part. The first branch turned out. Knit from * 4 more
times the same.
Cut the thread, fasten, hide the ends. The carrots are ready!
The bunny will not stay hungry!
Thanks for knitting with me!
