Amigurumi Cookie Man Free Pattern
Gingerbread man
“Knitting Tips”# The whole product is knitted in a spiral. Offset and lift loops (not specified).
# At the beginning of each row, use a marker or contrast thread to help identify the first stitch of each row.
# For knitting a toy, use your usual yarn and hook.
# We stuff the toy tightly, but not with a stone, so that the toy keeps its shape.
# Difficulty level – Easy
“Required Materials”1. Yarn:
– Alize Cotton Gold No. 612 (pens and shoes).
– Alize Cotton Gold No. 216 (main).
– Alize Cotton Gold No. 126 (tying).
-Alize Cotton Gold No. 62 (chef’s hat).
– Vita KOKO No. 3852 (for muzzle decoration).2. Hook: 2 mm.
3. Filler.
4. Thick cardboard or plastic.
5. Needle with a large eye (for stitching parts).
6. Auxiliary pins (needles).
7. Eyes on a secure mount or half beads (diameter 12-14 mm).
8 A little white felt (for the peephole).
9. Glue “Moment Crystal” transparent.
10. Scissors, electrical tape.
11. Wire (diameter 1.5 mm):
– take a piece of wire 30 cm.
– on both sides we retreat 3 cm from the edge and make droplets, twist the ends and fix with electrical tape.
The size of the finished toy depends on the tightness of your knitting and the materials you choose. The size of the bun using the indicated materials is 13-15 cm.
” Symbols – Amigurumi Ring.
MR-Magic ring
CH- Air loop.
SC – Single crochet.
İNC – Increase (We knit 2 SC in 1 loop).
DEC – Decrease (We knit 2 SC together “…” x – Number of repetitions.
Handles (2 pieces)
a) Fingers (2 pieces)
Knit with light green yarn
1r. MR6SC
2-3rr. 6 SC (2 rows), SL-ST.
Cut the thread and fasten off. Hide the end of the thread. We don’t hit.
ATTENTION!! Handles should be on the same prb)
Palm
We start with light green yarn
1r. MR6SC
2r. 6 NC [12]
3r. 12 sc
4r. “1 SC, İNC” x 6 [18]
5-7rr. 18 SC (3 rows)
We knit a finger for the left handle:
8r. 1 SC (along the palm), put a finger and knit, capturing the loops on the finger and on the palm together 2 SC, 15 SC (along the palm) [18]
9r. DEC (grab one loop on the palm and one loop on the finger), 2 SC (knit for the remaining loops on the finger), DEC (grab one loop on the finger and one loop on the palm), 14 SC (along the palm) [18]
10-11rr. 18 SC (2 rows)
We knit a finger for p8r. 15 SC (along the palm) and knit the finger and on the palm together (along the palm) [18]
9r. 14 SC (along the palm), one loop on the palm and finger), 2 SC (knit loops on the finger), DEC (loop on the finger and palm) [18]
From 10 to 25 rows we knit p-5-
12 rubles “7 SC, DEC” x 2 [16]
13r. “6 SC, DEC” x 2 [14]
14r. “5 SC, DEC” x 2 [12]
Stuff a little filler, paste
finished wire and fill to the end. But not tightly, but so that the palm is slightly flattened.
15 rubles “2 SC, DEC” x 3 [9]
Change to a yellow thread:
16r. Knit in the back half loop 9 SC
17-25rr. 9 SC (9 rows)
We attach the dark green thread to the 15th row, where we have half loops left and knit “SL-ST, CH” x 9. Cut and fasten the thread, hide the tip of the thread in the canvas.
spout
Knit with yellow yarn.
1r. MR 6SC.
2r. 6 NC [12]
3r. “1 SC, İNC” x 6 [18]
4-5rr. 18 SC (2 rows)
6r. 9 DEC [9], SL-ST.
Cut and fasten the thread, leave the tip for sewing. Fill with some filler.
Legs (2 pieces)
We start with a light green thread
Cast on a chain of 6 CH and starting from the 2nd loop from
we knit hooks:
1r. İNC, 3 SC, 4 SC in one loop, 3 SC, İNC [14]
2r. 2 NC, 3 SC, 4 NC, 3 SC, 2 NC [22]
3r. “1 SC, İNC” x 2, 3 SC, “1 SC, İNC” x 4, 3 SC, “1 SC,
İNC” x 2 [30]
4r. “İNC, 2 SC” x 2, 3 SC, “İNC, 2 SC” x 4, 3 SC, “İNC, 2
SC” x 2 [38]
5r. “3 SC, İNC” x 2, 3 SC, “3 SC, İNC” x 4, 3 SC, “3 SC,
İNC” x 2 [46]
We circle the sole on cardboard or plastic and cut it out.
6r. Knit in the back half loop 46 SC
7-10rr. 46 SC (4 rows)
We insert the insole, for fixing it can be glued.
11r. 12 SC, DEC, “2 SC, DEC” x 2, “DEC, 2 SC” x 2, DEC, 14 SC [40]
12 rubles 11SC, DEC, 2SC, 4DEC, 2SC, DEC, 13SC [34]
13r. DEC, 6SC, DEC, 14SC, DEC, 6SC, DEC [30]
14r. “3 SC, DEC” x 6 [24]
15 rubles 24 sc
16r. “2 SC, DEC” x 6 [18]
Change to a yellow thread:
17r. Knit in the back half loop 18 SC Stuff the leg.
18-22rr. 18 SC (5 rows), SL-ST.
Cut and fasten the thread, hide the tip of the thread.
. We return to the 16th row, where we left the half loops, we attach the dark green thread and knit: “SL-ST, CH” x 18.
. Cut and fasten the thread, hide the tip of the thread in the canvas.
We knit the second leg in the same way.
body-head
Knit with yellow thread
1r. MR6SC
2r. 6 NC [12]
3r. “1 SC, İNC” x 6 [18]
4r. 1 SC, İNC, “2 SC, İNC” x 5, 1 SC [24]
5r. “3 SC, İNC” x 6 [30]
6r. 2 SC, İNC, “4 SC, İNC” x 5, 2 SC [36]
We knit the legs: We attach the legs so that the heels look at the marker.
7r. We knit on the body: 5 SC, İNC;
attach one leg and knit, grabbing both walls: 5 SC; knit by
body: İNC, 5 SC, 2 İNC, 5 SC, İNC;
attach the second leg and knit, grabbing both walls: 5
SC; knit on the body: İNC, 5 SC [42]
8r. We knit on the body: İNC, 6 SC; knit in the remaining stitches on the leg: 6 SC , İNC, 6
SC; knit on the body: İNC, 7 SC, 2 İNC, 7 SC,
İNC; knit for the remaining loops on the leg: 6
SC, İNC, 6 SC; knit on the body: 6 SC, İNC [66]
9r. 5 SC, İNC, “10 SC, İNC” x 5, 5 SC [72]
10 rub. “11 SC, İNC” x 6 [78]
11r. 6 SC, İNC, “12 SC, İNC” x 5, 6 SC [84]
12 rubles “13 SC, İNC” x 6 [90]
13-17rr. 90 SC (5 rows)
ATTENTION!! The handles should be on the side, just above the legs. If you have an offset, then knit a few loops to offset.
We knit handles:
18r. We knit on the body: 20 SC; we attach the left handle (the finger should look with the legs in one direction) and we knit, grabbing both walls: 4 SC; knit by
body: 44 sc; we attach the right handle (the finger should look with the legs in one direction) and we knit, grabbing both walls: 4 SC; body knit: 18 SC [90]
19r. We knit on the body: 20 SC; knit in the remaining loops on the handle: 4 SC; DEC (grab one loop on the handle and one loop on the body); knit on the body: 42 SC; DEC (grab one loop on the body and one loop on the handle); knit in the remaining loops on the handle: 4 SC; knit on the body: 18
SC[90]
20-26rr. 90 SC (7 rows)
27r. 33SC, 6DEC, 4SC, 6DEC, 29SC [78]
28-32rr. 78 SC (5 rows)
Stuff the legs tightly to the end.
If you have eyes on a secure mount, then insert them between the 29th and 30th rows, the interval between the eyes is 4 SC (focus on 4 SC between decreases).
33r. “11 SC, DEC” x 6 [72]
34r. 5 SC, DEC, “10 SC, DEC” x 5.5 SC [66]
35r. “9 SC, DEC” x 6 [60]
36r. 4SC, DEC, “8SC, DEC” x 5, 4SC [54]
37r. “7 SC, DEC” x 6 [48]
Stuff the part tightly, but not into stone.
38r. 3SC, DEC, “6SC, DEC” x 5, 3SC [42]
39r. “5 SC, DEC” x 6 [36]
40r. 2SC, DEC, “4SC, DEC” x 5, 2SC [30]
41r. “3 SC, DEC” x 6 [24]
Hit to the end.
42r. 1 SC, DEC, “2 SC, DEC” x 5, 1 SC [18]
43r. “1 SC, DEC” x 6 [12]
44r. 6 DEC [6], SL-ST.
Cut and fasten the thread, hide the tip of the thread in the canvas.
Making pull-ups:
With pins we mark points for decreases (in the 27th row 4 SC). From these 4 SCs to the right and left we count one decrease and put the first two pins. From these pins, we also count 2 decreases to the right and left and put 2 more pins. These are your anchor points.
We do the pulls in turn.
Cap
We knit with a thread of milky color
1r. MR6SC
2r. 6 NC [12]
3r. 12 NC [24]
4r. “1 SC, İNC” x 12 [36]
5r. 1 SC, İNC, “2 SC, İNC” x 11, 1 SC [48]
6r. “3 SC, İNC” x 12 [60]
7r. “9 SC, İNC” x 6 [66]
8-10rr. 66 SC (3 rows)
11r. “9 SC, DEC” x 6 [60]
12 rubles “3 SC, DEC” x 12 [48]
13r. 48 sc
14r. 3SC, DEC, “6SC, DEC” x 5, 3SC [42]
15 rubles 42 sc
16r. “5 SC, DEC” x 6 [36]
17r. 36SC
18r. 2SC, DEC, “4SC, DEC” x 5, 2SC [30]
19r. 30SC
20 rub. Knit in front half loop 30 SC
21-22rr. 30 SC (2 rows), SL-ST.
Cut the thread and fasten off. Leave
tip for sewing. Stuff loosely, to keep it in shape.
“Assembly and Design”
1. If you have eyes on a secure mount, then step back from the eye 1 row down and sew on the spout. If you make eyes like me, then we fasten the spout with a pin between the 26th and 27th rows (make sure that the spout is in the center) and sew.
2. We cut out circles from white felt, the diameter of the half-beads, glue them to our blanks, glue the eyes over the spout.
With pins we outline the eyebrows, cilia. We take brows, a smile and cilia.
1. We fasten the cap to the head, as you like, with pins and sew.
Congratulations, your Gingerbread Man
